Calipers @ O'Reilly's
Thread Starter
Instructor
Joined: Dec 2003
Posts: 177
Likes: 0
From: Sylacauga Alabama
Calipers @ O'Reilly's
Has anyone bought caliper's from O'Reilly's. I was there tonight and the are Delco Moraine calipers casting #'s 5473796 565. Are these any good? would they be "O" ring equipped and stainless steel sleeved?
$63.99 per caliper. with a $60 core.
$63.99 per caliper. with a $60 core.
Race Director
Joined: Nov 2002
Posts: 12,142
Likes: 54
From: Taylor Michigan
The Counselor is Right
A very good re-builder that supplies nationwide....
A whole list of products are re-manufactured by them. I wouldn`t be surprised if the Vette vendors merely re-boxed their products and sold them as their own. Here's a short list that I sold
Electronics.... computers, distributors,
Steering control valves and gears
Master cylinders
waterpumps
calipers
Plus they R&R special orders....
Team Owner
Joined: Oct 2004
Posts: 23,831
Likes: 10
From: Springfield MO
St. Jude Donor '07
A very good re-builder that supplies nationwide.... A whole list of products are re-manufactured by them. I wouldn`t be surprised if the Vette vendors merely re-boxed their products and sold them as their own. Here's a short list that I sold
Electronics.... computers, distributors,
Steering control valves and gears
Master cylinders
waterpumps
calipers
Plus they R&R special orders....
Advanced
Joined: May 2007
Posts: 83
Likes: 4
From: Leander Texas
Have four on my car. Has only been four months and 1000 miles, but no problems. I was surprised, had everything in stock, even front hoses. Didnt ask if they were sleeved. With lifetime warranty I didnt care.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Dec 2004
Posts: 4,876
Likes: 1
From: Jersey Shore Exit 98
when I found my vette about 4 years ago I needed to replace the master brake cylinder. so I went to auto-zone purchased one just to get her home. I was thinking I would chg it later when I was restoring the beast. Its been on & working for 4 years plus and never failed me or leaked yet. $59.00
Last edited by Jims79; Dec 6, 2007 at 08:42 AM.
