77 doors
Drifting
Joined: Jun 2005
Posts: 1,523
Likes: 1
From: grand prairie texas
Send these guys a E-mail they are good folks with reasonable prices but I dont know if they deliver to the U.K.
http://www.contemporarycorvette.com/
http://www.contemporarycorvette.com/
Thread Starter
Instructor
Joined: Oct 2007
Posts: 137
Likes: 0
From: Nottingham
Thanks for the link i'll have a look and contact them, was there a change in door dimensions between 77 and 79? i think the later C3 had small changes to the chassis dash etc, but did the door spec/size change?
Thanks,
Wev
Thanks,
Wev
Melting Slicks
Joined: Dec 2000
Posts: 2,635
Likes: 0
From: Union Ontario
a 78+ door will work with some modifications to the door handle attachment area. Some holes also need to be drilled.The previous owner of mine replaced my 78 door with an earlier model. During restoration, I cut out the door handle area and fabbed a new one up like the 78's should be. It took me around 2 hours to do.
Doors are plentiful and fairly cheap. I just let an empty 77 door shell go for $50 and it was in excellent condition. Your major cost is going to be the shipping of it overseas.
Doors are plentiful and fairly cheap. I just let an empty 77 door shell go for $50 and it was in excellent condition. Your major cost is going to be the shipping of it overseas.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Le Mans Master
Joined: Nov 2004
Posts: 7,186
Likes: 45
From: detroit area
Drifting
Joined: Oct 2004
Posts: 1,496
Likes: 1
From: Lafayette Louisiana
I have a drivers side shell that I would sell. The metal frame is very good. There may be some pitting in the upper corner where the weather strip attaches but the lower corners are perfect. I thought about using it on my 81 but don't feel like fixing the few minor flaws in the skin. UPS cracked the skin in a few places but nothing major. I needed the passenger side and the damage to it was much worse.
PM me if you are interested and I will get you some pics and a price (cheap).
PM me if you are interested and I will get you some pics and a price (cheap).
Thread Starter
Instructor
Joined: Oct 2007
Posts: 137
Likes: 0
From: Nottingham
I have a drivers side shell that I would sell. The metal frame is very good. There may be some pitting in the upper corner where the weather strip attaches but the lower corners are perfect. I thought about using it on my 81 but don't feel like fixing the few minor flaws in the skin. UPS cracked the skin in a few places but nothing major. I needed the passenger side and the damage to it was much worse.
PM me if you are interested and I will get you some pics and a price (cheap).
PM me if you are interested and I will get you some pics and a price (cheap).
Any other links appreciated as this is holding up my project now and im eager to get her back in shape.
Thanks in advance,
Wev