rear end markings
Thread Starter
3rd Gear
Joined: Nov 2008
Posts: 3
Likes: 0
rear end markings
So I was going through my literally, 3 sheds full or Corvette parts. I found 4 Rear Ends that I would like to get rid of. But, i want to keep the best one for my style and put it in my 71. Was just wondering if anyone knew where I could find a chart or something so I could tell what gears are in them. I have all the letters and markings from them. They are all out of 69-73 Vettes if it matters. Thanks in advance.
Jesse
Jesse
Melting Slicks
Joined: Sep 2004
Posts: 3,222
Likes: 665
From: Northeast
If they are original and haven't been changed:
http://www.corvette-world.com/corvet...tification.php
http://www.corvette-world.com/corvet...tification.php
Tech Contributor
Joined: Aug 1999
Posts: 15,130
Likes: 3,938
From: Connecticut, USA
You can pull the cover off and check the stamping on the side of the Rg it will have the # of teeth on the R&P in case they have been swapped in the past.
Probably a good idea to see what the inside looks like as well and what type of posi is used.
Probably a good idea to see what the inside looks like as well and what type of posi is used.
