painting question
Thread Starter
Pro
Joined: Jun 2008
Posts: 680
Likes: 3
From: charlotte N.C
painting question
I am just about to paint my 68 chassis. I have read once before on this site that there is a nozzle or something that can fit in the holes of the chassis to paint in some of the inside of the frame. Does anyone know what this tool is called or where I could get it?
Thanks,
Kevin
Thanks,
Kevin
Burning Brakes
Joined: Jan 2009
Posts: 1,224
Likes: 1
From: Clarksville Indiana
Its amazing the wealth of information that is contained in the 100's of threads that have been posted in here at this forum. Now if the search tool would just be able to find any of them for us it would be very useful! Good luck! 
Advanced
Joined: Jan 2007
Posts: 80
Likes: 0
From: Sylvania Ohio
When I did my 73 frame, I bought a rust proofing gun from Eastwood. I comes with a long wand that the end sprays in a circular pattern. I then filled the pot full of black Rustoleum and shoved the wand in the holes, and sprayed away. Some spots the wand wouldn.t work so I shoved some tubing(flex) and finished. Then I wiped the outside of the frame down with solvent. Let the inside dry and then did the outside with a good 2 part epoxy. It looks GOOD.
