Clutch rod boot install question

Reply Subscribe

Thread Tools

Search this Thread

Sep 16, 2009 | 09:36 AM

GD70

Thread Starter

Le Mans Master

Joined: Jan 2007

Posts: 5,485

Likes: 7

From: Peekskill NY

Clutch rod boot install question

Hey Guys,
I have a new boot to replace the old shreaded one. I noticed that the hole in the new boot is smaller than the diameter of the rod. Is the rod suppose to be lubed to slip back & forth, or is the boot end suppose to move back & forth with the rod like an accordian?
Glenn

Sep 16, 2009 | 10:11 AM

BenUK

Burning Brakes

Joined: May 2005

Posts: 1,145

Likes: 5

From: South of London, Engerland

If you do lube the rod, you might be best choosing a silicone-based lube rather than a petroleum lube, which might degrade the rubber.

Sep 16, 2009 | 10:26 AM

GD70

Thread Starter

Le Mans Master

Joined: Jan 2007

Posts: 5,485

Likes: 7

From: Peekskill NY

Quote:

Originally Posted by BenUK

If you do lube the rod, you might be best choosing a silicone-based lube rather than a petroleum lube, which might degrade the rubber.

Good advice.
Glenn

Sep 16, 2009 | 08:16 PM

GD70

Thread Starter

Le Mans Master

Joined: Jan 2007

Posts: 5,485

Likes: 7

From: Peekskill NY

Anyone know what is correct for this? I'm guessing no lube, the tight fitting hole moves with the rod.

Sep 16, 2009 | 08:24 PM

dmayhew

Drifting

Joined: Oct 2007

Posts: 1,254

Likes: 5

From: Brown Summit North Carolina

The boot fits tight on the rod. The rod causes the boot to move in and out with the rod movement.

When the clutch is not depressed, the boot is colasped. It elongates out as the rod move forward when the clutch is pressed.

Thanks
David