BB Shroud Question
Thread Starter
Pro
Joined: Sep 2007
Posts: 735
Likes: 1
From: Harleysville PA
BB Shroud Question
69 427/400 AC. The top outlet of the radiator is very close to the corner of the shroud and it seems like the hose will make contact with the shroud - see pic below. Both the shroud and radiator are correct for the car. I see in the AIM a picture showing the corner of the shroud cut out and assume that this may have been a practice to create clearance. Anyone out there have a similar issue and how did you resolve it? Does anyone have a piece of their shroud cut out to make clearance for the radiator hose?
Safety Car
Joined: Apr 2000
Posts: 3,802
Likes: 61
From: Wichita KS
The shroud does not look like it is on all the way. It should be past the 1/4" step down to the 1" step. Then the seal goes in front of the 1/4" step.
The seal definitely belongs on the flat top of the radiator rather than the edge/corner.
cc
The seal definitely belongs on the flat top of the radiator rather than the edge/corner.
cc
