Headlight support bar
Burning Brakes
Joined: Nov 2006
Posts: 954
Likes: 40
2022 C3 of the Year Finalist - Modified
I used in my project to bond metal to fiberglass with 3M - 08115 and to bond FG to FG with 3M - 08219.
I bond the new headlight support bar directly to the FG without the FG layer that rivet to the bar.
Good Luck
Avner
I bond the new headlight support bar directly to the FG without the FG layer that rivet to the bar.
Good Luck
Avner
Burning Brakes
Joined: Apr 2009
Posts: 807
Likes: 2
From: VIRGINIA BEACH VIRGINIA
Had the same problem with mine. Body guy across the street helped me pull the hood and he used a two part adhesive (It was 3-M but don't know what kind...black) and he used a caulk type gun to shoot the 2 part up in between the support bar and the front clip. Used about 6 clamps to hold it together and it lines up almost perfect with my hood now. we did it after we primed the car and before we painted it. Before we epoxed it, it stood probably 3/4 of an inch above my hood in the center.
before
after
before
after
