Door Shim Question
Melting Slicks
Joined: Jul 2009
Posts: 3,264
Likes: 3
From: Vero Beach FL
Anywhere from none to as many as five (maybe more) The original drivers door on my car had two on one hing and none on the other. I had to replace the door because the doors frame was rusted the replacement door took three shims on one hing and two on the other. My point being different doors will require a different amount shims. I bought my extra shims from a online auction site for a buck a piece. It will be trial and error to get the right combination and the shims do have a front and back to them. When you start out only use the bottom two bolts on both hings. Slots in the shims allow you add and remove shim without taking out the bolts. This is were you can put them in backwards two thing happen if they are in backwards. First you will not be able to adjust the door forward enough and second the top bolts will not go through (align with) the shim holes.
Best of luck
Best of luck
Team Owner
Joined: Jun 2000
Posts: 38,923
Likes: 1,482
From: Southbound
Cruise-In II Veteran
FWIW: changing the front clip would not necessarily affect the door hinge shims. If your doors align well now (rear, bottom, front, etc), open and close well, leave the shims as is and set your replacement front clip to the doors.
Melting Slicks
Joined: Jul 2009
Posts: 3,264
Likes: 3
From: Vero Beach FL
