lights
Thread Starter
Advanced
Joined: Oct 2009
Posts: 54
Likes: 0
lights
Yesterday after installing a new shifter console I noticed my speed, tach, instrument cluster, and shifter lights were out. Fuse is ok and all other lights work including fasten seat belt etc. i'm stumped . its almost as if the pot in the on off switch is bad.... any thoughts?
Thread Starter
Advanced
Joined: Oct 2009
Posts: 54
Likes: 0
I checked the fuse and don't have any voltage there ..shouldn't I? The passenger courtesy light works and dims when you turn the light switch. Fasten seat belt light works etc. tried moving around wire harness to see if I could get lights for a moment-nothing. I don't have a schematic so am limited to what to check next.
Intermediate
Joined: Nov 2011
Posts: 30
Likes: 1
From: warrenton va
I think the feed to that fuse comes from the headlight switch when it is pulled out.
Do your driving lights work ?
I had to replace my headlight switch because the dash lights and driving lights didn't work.
I had installed a new switch but it was defective.
Do your driving lights work ?
I had to replace my headlight switch because the dash lights and driving lights didn't work.
I had installed a new switch but it was defective.
