When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I replaced my rear mono leaf and shocks to bring it down to stock height but I noticed that the rear wheels seem tilted inward at the top. It could have been this way before but didn't notice. It's not bad but not paralle with the front. Does this mean it's out of alignment?? I've seen other C3 the same way??
It's common to see C3's with too much negative camber. That doesn't mean it's correct. It just means it's common.
Mine had it from bad bushings and 30+ years of weight on the spring. Take it to a corvette shop who knows how to do a rear end alignment on these cars. Your rear wheels should be almost straight up and down.
It's common to see C3's with too much negative camber. That doesn't mean it's correct. It just means it's common.
Mine had it from bad bushings and 30+ years of weight on the spring. Take it to a corvette shop who knows how to do a rear end alignment on these cars. Your rear wheels should be almost straight up and down.
I live in central IL., I don't know of any specialized Corvette shop in my area??
...I don't know of any specialized Corvette shop in my area?...
Doesn't necessarily have to be a Corvette shop -- only somneone who is familiar with the Corvette rear suspension. Call the alignment shops in your area until you find one.