1971 Headlight Sheilds
#1
Burning Brakes
Thread Starter
1971 Headlight Sheilds
Hello
when I got my 1971 the previous owner had the car painted and they didn’t put the sheilds back
i went through the Assembly Manuel and I can’t find any illustrations showing them
Does anyone have something to show me how they go in and where they attach?
i have new ones from Paragon but no drawings
thank you
when I got my 1971 the previous owner had the car painted and they didn’t put the sheilds back
i went through the Assembly Manuel and I can’t find any illustrations showing them
Does anyone have something to show me how they go in and where they attach?
i have new ones from Paragon but no drawings
thank you
#4
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,442
Received 6,292 Likes
on
3,919 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
are you talking the black shield that goes behind the grill to keep the lights from getting hit by stones when they are down?
If so, pull off the headlight bezel and there should be 2 or 3 screws holding on the grill along the top. You just use those screws to hold them in. There is a left and right so you'll have to eye them to see which side they fit on. My po had them reversed. i just removed them last summer at a track event for more cooling, it helped so i havent put them back yet
If so, pull off the headlight bezel and there should be 2 or 3 screws holding on the grill along the top. You just use those screws to hold them in. There is a left and right so you'll have to eye them to see which side they fit on. My po had them reversed. i just removed them last summer at a track event for more cooling, it helped so i havent put them back yet
Last edited by Rescue Rogers; 10-20-2019 at 07:53 AM.
#5
Race Director
Member Since: Apr 2011
Location: North of Toronto - Ontario
Posts: 10,856
Received 3,139 Likes
on
2,070 Posts
Bolted (with clips) to the lip just above the grills. This pic from underneath with the headlights raised
HIH
M
HIH
M
Last edited by Mooser; 10-20-2019 at 09:18 AM.
#8
Race Director
Member Since: Apr 2011
Location: North of Toronto - Ontario
Posts: 10,856
Received 3,139 Likes
on
2,070 Posts
metal piece?
M
M
#9
Burning Brakes
Thread Starter
on the back of the shield in the yellow car picture, there is a metal plate? where does that come from, my repo's do not have it.
Last edited by peyc2; 10-21-2019 at 07:28 PM.
#10
Race Director
Member Since: Apr 2011
Location: North of Toronto - Ontario
Posts: 10,856
Received 3,139 Likes
on
2,070 Posts
In the middle there where the oval cutout is? That's actually the underside of the chrome bumper on my car (1972) There is no metal on the shields themselves. One mine, there is a fiberglass lip that the 3 screws go through (from the bottom) and the shields with the 3 j-clips attached sits on top of that lip and the screws go into the clips holding it down onto the fiberglass lip
M
M
#11
Race Director
Member Since: Apr 2011
Location: North of Toronto - Ontario
Posts: 10,856
Received 3,139 Likes
on
2,070 Posts
Here is a closeup of that area, maybe it helps
The red points at the edge of the bottom of the bumper
The blue is the fiberglass "lip" that the bumper fits around
The Yellow is one of the cutouts in the bottom of the bumper that lets you get at the screw holding the plastic shield in place
M
The red points at the edge of the bottom of the bumper
The blue is the fiberglass "lip" that the bumper fits around
The Yellow is one of the cutouts in the bottom of the bumper that lets you get at the screw holding the plastic shield in place
M
#12
Race Director
Member Since: Apr 2011
Location: North of Toronto - Ontario
Posts: 10,856
Received 3,139 Likes
on
2,070 Posts
Shield sits on top of the lip in blue, screws go where the cutouts in the bumper are, marked in yellow here
M
Last edited by Mooser; 10-21-2019 at 08:50 PM.