Carpet install
Thread Starter
Pro
Joined: Oct 2010
Posts: 695
Likes: 55
From: Palm Desert California
Carpet install
Hey guys; I know this has probably been covered before but couldn't find it under the search function. Received my carpet from Wilcox and will start to install this week . Looking at the top of the footwells there are two small rectangular covers with what looks like half inch plugs in them. is this where the carpet plugs go or is there another reason for them. Thanks
It's a '73 vert.
It's a '73 vert.
Last edited by tpfarm; Oct 25, 2014 at 09:30 PM. Reason: more info
Team Owner
Joined: Jul 2004
Posts: 40,435
Likes: 793
From: Redondo Beach, California
Pull them out and re-install. When you put the new carpet in, you need to know where the plugs go...Use an "ice pick" to probe the carpet looking for the hole for the plug. It helps to pull the carpet back from the foot-firewall and look were the plugs are going..this allows me to use the pick and get an accurate plunge into the firewall fiberglass hole that's been drilled for them. Once you've found the firewall hole, you're on your way.
Racer
Joined: Feb 2013
Posts: 365
Likes: 39
From: Sebastian FL
Holes
Hey guys; I know this has probably been covered before but couldn't find it under the search function. Received my carpet from Wilcox and will start to install this week . Looking at the top of the footwells there are two small rectangular covers with what looks like half inch plugs in them. is this where the carpet plugs go or is there another reason for them. Thanks
It's a '73 vert.
It's a '73 vert.
