Corvette Yoga, Under Dash Level
Thread Starter
Pro
Joined: Feb 2014
Posts: 607
Likes: 122
Corvette Yoga, Under Dash Level
Got a couple of questions for those who have done interiors. I tried the search function, but did not get great results.
I am down to putting in the interior on my 68 Coupe and was wondering how far up under the dash to put the Dynomat like insulation? I have current ran it up to where the box for windshield wipers recede into. Seems like there is another inch or two of space I could cover, but it is it over kill at this point?
Also for those of you who have done this type of insulation, any spots I should double down on for added noise and heat protection?
I put a coat of Lizard skin ceramic sound insulation down first and am now working on Dynomat like stuff. My wife snapped a few shots of me doing it and asked how long I have been doing yoga. See photos for explanation.
I am down to putting in the interior on my 68 Coupe and was wondering how far up under the dash to put the Dynomat like insulation? I have current ran it up to where the box for windshield wipers recede into. Seems like there is another inch or two of space I could cover, but it is it over kill at this point?
Also for those of you who have done this type of insulation, any spots I should double down on for added noise and heat protection?
I put a coat of Lizard skin ceramic sound insulation down first and am now working on Dynomat like stuff. My wife snapped a few shots of me doing it and asked how long I have been doing yoga. See photos for explanation.
Race Director
Joined: Jan 2007
Posts: 10,687
Likes: 697
From: Danville Illinois
2025 Corvette of the Year Finalist - Modified
2024 C3 of the Year Winner - Modified
2021 C3 of the Year Finalist - Modified
2019 C3 of Year Finalist (appearance mods)
Been there done that, take the t/tops off, that's just not right.
I put two layers on the floor boards and firewall/trans tunnel, always sounded noisy to me there.
You are still smiling in the last picture, that is also not right either.
I put two layers on the floor boards and firewall/trans tunnel, always sounded noisy to me there.
You are still smiling in the last picture, that is also not right either.
Last edited by Mod75; Oct 31, 2014 at 10:47 PM.
Drifting
Joined: Jun 2011
Posts: 1,541
Likes: 268
From: iowa city iowa
2020 Corvette of the Year Finalist (appearance mods)
C3 of Year Winner (appearance mods) 2019
I felt exceptionally old after working on mine last winter. I set up a camera and found out why. :-)
Drifting
Joined: Apr 2013
Posts: 1,750
Likes: 268
From: Central Wisconsin
I felt exceptionally old after working on mine last winter. I set up a camera and found out why. :-)
76 corvette gymnatics.mov - YouTube
76 corvette gymnatics.mov - YouTube
Team Owner
Joined: Jul 2004
Posts: 40,422
Likes: 792
From: Redondo Beach, California
I've covered the inside of the 70 firewall with insulation also. My next job is to replace the interior wire harness...got a new one from lectriclimited.
How were these interiors put together on the assembly line. Seems like a really difficult area to be working in.
How were these interiors put together on the assembly line. Seems like a really difficult area to be working in.
Race Director
Joined: Jan 2007
Posts: 10,687
Likes: 697
From: Danville Illinois
2025 Corvette of the Year Finalist - Modified
2024 C3 of the Year Winner - Modified
2021 C3 of the Year Finalist - Modified
2019 C3 of Year Finalist (appearance mods)
I felt exceptionally old after working on mine last winter. I set up a camera and found out why. :-)
76 corvette gymnatics.mov - YouTube
76 corvette gymnatics.mov - YouTube
Great video, i need to do that so when my wife says what are you doing out there i can say watch the video.
