Ground Clearance for Tremec
Thread Starter
Racer
Joined: Feb 2001
Posts: 365
Likes: 77
From: Gold Canyon, Arizona
Ground Clearance for Tremec
My '74 is lowered, with the frame under the doors at just 5 inches from the ground. Will the Tremec 5-speed be tucked enough under the frame so that it doesn't grind the road in say, a bump?
________________________________________ ___
Originally from the city of "Wrestling's Living Legend"
________________________________________ ___
Originally from the city of "Wrestling's Living Legend"
Melting Slicks
Joined: Jun 2011
Posts: 3,116
Likes: 598
My '74 is lowered, with the frame under the doors at just 5 inches from the ground. Will the Tremec 5-speed be tucked enough under the frame so that it doesn't grind the road in say, a bump?
________________________________________ __
Originally from the city of "Wrestling's Living Legend"
________________________________________ __
Originally from the city of "Wrestling's Living Legend"
My T56 6-speed fits fine and the bell housing is the lowest point. The exhaust hits ground before anything else.
Melting Slicks
Joined: May 2004
Posts: 2,743
Likes: 845
From: Gulf of America
2023 C7 of the Year Finalist - Unmodified
2018 C3 of Year Finalist
On my '72, the bell housing is the low point. The TKO600 case low point sits even with the trans crossmember. I'm running sidepipes.
