Can you help me identifying this part?
#1
Instructor
Thread Starter
Can you help me identifying this part?
There is a metallic reinforcement part attached to the fiberglass at the front of the car. It's located between the headlight and the hood, on the underside of the body.
Is that part sold by some of the online stores? Can I get that part from Eckler's corvettes, Willcox, etc?
This is the picture of what I'm looking for:
Is that part sold by some of the online stores? Can I get that part from Eckler's corvettes, Willcox, etc?
This is the picture of what I'm looking for:
The following users liked this post:
fede (01-14-2017)
#3
neither your post or your profile list the year of your car but the link below will point you in the right direction
http://www.zip-corvette.com/68-82-c3...ing-strip.html
http://www.zip-corvette.com/68-82-c3...ing-strip.html
The following users liked this post:
fede (01-14-2017)
#4
Instructor
Thread Starter
Thanks for that guys, I have a '75 coupe so I guess the part must be this one:
http://www.zip-corvette.com/68-82-c3...ement-bar.html
That picture seems to have another smaller piece of metal, right? Is that a stock part in bad shape or a dirty fix done in the past?
http://www.zip-corvette.com/68-82-c3...ement-bar.html
That picture seems to have another smaller piece of metal, right? Is that a stock part in bad shape or a dirty fix done in the past?
#5
Red Road Warrior
Member Since: Dec 2000
Location: Lansdale 19446 PA
Posts: 3,345
Received 282 Likes
on
199 Posts
St. Jude Donor '10-'11, '15, '19
Forum member has that part for sale in C3 Parts fro Sale/Wanted
Here: https://www.corvetteforum.com/forums...air-items.html
4th or 5th picture down
Here: https://www.corvetteforum.com/forums...air-items.html
4th or 5th picture down
The following users liked this post:
fede (01-14-2017)
#6
Melting Slicks
Member Since: Jul 2010
Location: perth western australia
Posts: 3,100
Received 599 Likes
on
533 Posts
these go on each end as well, you might need them.
http://www.zip-corvette.com/69-82-ho...et-23bddb.html
http://www.zip-corvette.com/68-82-ho...forcement.html
you need a steady hand with the cut off wheel , the glass is thin there .
Certainly looks like it time to replace
http://www.zip-corvette.com/69-82-ho...et-23bddb.html
http://www.zip-corvette.com/68-82-ho...forcement.html
you need a steady hand with the cut off wheel , the glass is thin there .
Certainly looks like it time to replace
Last edited by bazza77; 01-14-2017 at 06:10 PM.