Clock Problems
Thread Starter
Heel & Toe
Joined: Mar 2018
Posts: 23
Likes: 0
From: Fayetteville NC
Clock Problems
Hey friends does anybody know how to remove the clock stem on a 77 corvette, please somebody help me I'm stuck got all the new parts but the stem was broke and I don't know how to replace it.
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,847
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
The stem is held in place by the pressed on (setting) gear. The only way to remove the stem from the clock is to drive the stem out of the gear from the backside. When you do this be careful not to lose the spring that is behind the gear, you'll need this when you press drive the gear back on. I've probably got a stem here if you need one (or the gear). If you need a picture of this message me at service@Willcoxcorvette.com and I'll post one here for you.
Willcox
Willcox
Last edited by Willcox Corvette; Mar 26, 2018 at 08:54 PM.
Thread Starter
Heel & Toe
Joined: Mar 2018
Posts: 23
Likes: 0
From: Fayetteville NC
Clock Problems
Sparky77 thanks, but apparently, somebody before I became owner of the Vette broke the **** and its impossible to get to the screw. I'm going to cut it or try something else, I already ordered a new stem and **** kit.
