Cleaning stubburn si wdo class?
Thread Starter
Instructor
Joined: Jun 2015
Posts: 182
Likes: 21
From: Alger Mich
Cleaning stubburn si wdo Glass?
78' S/A pwr wdo's,very nice 34K Corv. All glass is orig,no scratches except:very fine rash marks at outside upr edge of both dr glass. Seems to be on outside length wise. Me thinks,when close to lwr park posn,with sweep of the wdo track pressure the black felt wiper is creating this. Anybody got a way to clean these marks? I have tried mild rubbing comp.even wdo glass polish stick with slow wheel,no luck! Thanx,Hdal
Last edited by hdal; Apr 25, 2018 at 12:23 PM. Reason: Class sould read Glass in title
Drifting
Joined: Apr 2010
Posts: 1,857
Likes: 332
From: Cartersville GA
Hdal
I think the biggest reason you haven't gotten a reply is language barrier. Your post is hard to understand, Best I can tell you are asking how to remove scratches from the side glass that's in the doors.....?
I can't help you with that but maybe someone will address it.
Brian
I think the biggest reason you haven't gotten a reply is language barrier. Your post is hard to understand, Best I can tell you are asking how to remove scratches from the side glass that's in the doors.....?
I can't help you with that but maybe someone will address it.
Brian
Is my vette stock?? HAHA
Joined: Oct 2015
Posts: 20,100
Likes: 9,229
From: Im not allowed to tell you
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
Have you tried asking a glass shop. Maybe it can be polished out with a high speed buffer
Race Director
Joined: Apr 2011
Posts: 11,183
Likes: 3,334
From: North of Toronto - Ontario
If you can catch it with a fingernail there's not much you can do.
Polishing with cerium-oxide with a power buffer is the only way I know of removing actual scratches and you are removing glass at that point so it's easy to make it all wobbly or worse since you'll be heating it as well
M
Polishing with cerium-oxide with a power buffer is the only way I know of removing actual scratches and you are removing glass at that point so it's easy to make it all wobbly or worse since you'll be heating it as well
M
