pulled to far
Thread Starter
Racer
Joined: Dec 2012
Posts: 487
Likes: 66
From: Rhode Island
pulled to far
HI every one- I was working on my tilt and tell and pulled it out to far and 1 wire came off of the ignition switch there are 2 connector white and black there are 2 wires going into the black connector looks like a red and orange wire can someone send me a pix of the wires that connect to the ignition switch so I don't fry my 1970 thank-you
plus wire diagram don't show where they go
plus wire diagram don't show where they go
Instructor
Joined: Oct 2004
Posts: 174
Likes: 10
From: Pleasanton Ca.
Best i can describe is go here : https://www.justanswer.com/chevy/7e2...vy-trucks.html
Midway down there is a color picture of a blue and black pair of connectors. Mine are like the black connector with the #4 red and #5 orange placements. FYI, I dont have the other wires shown in the black connecter example shown.
Midway down there is a color picture of a blue and black pair of connectors. Mine are like the black connector with the #4 red and #5 orange placements. FYI, I dont have the other wires shown in the black connecter example shown.
