When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I posted an earlier thread on wanting some detailed information on replacing the weatherstripping that goes under the vertical black windshield molding. This should be a little clearer than my earlier post.Was wanting some detailed information on how to get those pieces off and what brand of weatherstripping y’all might recommend. In the middle of the picture, it shows that little sucker I’m talking about. Thanks for any help!
Last edited by Brianl1620; May 20, 2021 at 10:28 PM.
these vertical mouldings do Not have a weather strip in them factory. However, as I outlined in your other thread. open the door, remove the top screw from the A pillar weather strip. (order new A pillar weather strips). remove A pillar weather strip from channel. Yes it will be glued in. once all weather strip and glue is removed, you will see 3 or 4 Phillips head screws. remove these. the weather strip channel can then be pried away, it is also stuck to the front vertical moulding with a adhesive foam tape. now you can remove the front vertical moulding which wraps around the A pillar and does NOT have a weather strip in it. The windshield is sealed with the urethane glue that mounts it to the windshield frame.
Vertical windshield molding replacement
