1968 BB Vert 4 speed Parts Car
#1
Race Director
Thread Starter
Member Since: May 2002
Location: Check this riff........
Posts: 14,376
Likes: 0
Received 1 Like
on
1 Post
1968 BB Vert 4 speed Parts Car
1968 Big Block Vert 4-speed project car, or parts car. Was a running car before I disassembled.
Tons of new and extra parts. All prices are without shipping and without crating if needed.
Interior Parts
Brand new black carpet. $100 (paid $200) sold!
Original seats black vinyl no seat backs with tracks, definately usable could use recovered to be really nice
$200 Sold awilson
1980 Blue velvet seats with tracks in excellent condition $300
Brand new center console plate $100 SOld sihler
original upper dash in fair to good condition $150
Original drives side lower dash fair to good $100
Original passenger lower dash fair $50
Center Guage cluster (broken) Plus all gauges $200
Speedo and tach unknown $100
Steering wheel original and fair $100
Body Parts
Front clip $400 as described below SOLD
Rear clip $400 as described below SOLD
Deck Lid with 80% of hard ware $300Sold ikwhite
Hood Some aftermarket hood with latches $150 (pending sale)
Doors, original complete with glass and mechanisms, (note may be missing some lock latching hardware) $800 (remember one year only!) SOLD
Doors, another set off of a coupe in good condition with all mechanisms and coupe glass $800 (remember one year only!)
Convertible frame top, some rust, could be put in good shape easy $500 Sold awilson
Convertible frame top, excellent $800 Sold ikwhite
Hard Top, worn solid and no cracks. Still has the triangular chrome pieces! $600
Chrome (New and on car less then 100 miles)
Front bumber $200 (pending sale) Sold sihler
Rear Bumpers $400 SOLD
Front bumperettes $200 SOLD
Front hockey sticks $100
Chassis
Rolling chassis. Frame, appears to be a late , , see pics
Rolling chassis will consist of frame, wheels, front suspension and rear suspension including rear end, antissway, trailing arms, etc. no steering components. $2500 with clean title. No radiator Support, and front cross member (under radiator) is rusty. Frame is light surface rust only, but is bent about 1” on the left side where the frame rises just before the rear of the engine. Posted pics of this here before, everyone says $300 repair with a competent repair shop, but I can’t find anyone to do it and is probably the “straw that broke the camels back” for me deciding to not finish the project.
Mechanical
Engine less carb (see pics) 1968 427. $500
---pan to manifold, no accessories, will include harmonic dampner.
NOM Big Block. 1968 code. Old edelbrock intake, holly carb. Ran when parked, but its sat a while and probably could use a rebuild. Has a wicked cam, don’t know what, but I could barely get 10in of vacume. (pending sale)
Transmission (see pics) $300
Unknow at this point. It is a 4-speed but reverse is up and to the left! LOL.
sold
Original steering box $100
Rebuilt steering box $200
Spal aluminum rad and fans $600.
Serpentine kit with remote power steering res $300 SOLD!
Speed demon carb $200
Holly 4di port injection. Missing o2 sensor. Purchased used and never installed. $750 (new this is like $2500!)
Hooker super comp headers, coated, one slight depression put in one pipe to clear ps pump. $500 (over $700 new!!)
More to come as I dig through all my boxes!
Just some extra comments
Body off Frame
Front surround appears to have been replaced sometime in its history, fiberglass seems thin to me, but I was told the 1968 glass was thin compared to later years. Right front fender was damaged and repaired by previous owner.
Birdcage seems OK, but I have not torn it down all the way to inspect. At first it seemed bad, but it turned out that the molding around the windshield had metal reinforcement and THAT is what rusted, not the frame itself.
. Rear clip is in good shape, but repairs needed around wheel wells were it looks like someone ran tires that were to wide. The fender looks fine, but the “lip” is missing or cracked.
Suspension
Looks to me like previous owner redid entire suspension with VBP parts, but then the car sat a while.
New seat backs
Lots of new trim parts (latches bezels etc.)
I will take 10k for everything or whittle it away part by part. there is a LOT of new stuff, and extras with this car. I am in las vegas. I listed this before, but now I am serious about moving this thing out. I will take pics and all prices are negotiable. I have no ability to split the front/rear clips/birdcage, so if you want that, you have to come and get it. If you need something for a 68 that I didn't list, I probably have it LOL. Also, I am not sure what the title goes with, the body or the frame, anyone know? I have deleted my ph#, and email, because I think I am violating the rules, please don't pm me either because I think thats not allowed as well. Sorry for the confusion. some basic pics here http://forums.corvetteforum.com/show....php?t=1630267
Tons of new and extra parts. All prices are without shipping and without crating if needed.
Interior Parts
Brand new black carpet. $100 (paid $200) sold!
Original seats black vinyl no seat backs with tracks, definately usable could use recovered to be really nice
$200 Sold awilson
1980 Blue velvet seats with tracks in excellent condition $300
Brand new center console plate $100 SOld sihler
original upper dash in fair to good condition $150
Original drives side lower dash fair to good $100
Original passenger lower dash fair $50
Center Guage cluster (broken) Plus all gauges $200
Speedo and tach unknown $100
Steering wheel original and fair $100
Body Parts
Front clip $400 as described below SOLD
Rear clip $400 as described below SOLD
Deck Lid with 80% of hard ware $300Sold ikwhite
Hood Some aftermarket hood with latches $150 (pending sale)
Doors, original complete with glass and mechanisms, (note may be missing some lock latching hardware) $800 (remember one year only!) SOLD
Doors, another set off of a coupe in good condition with all mechanisms and coupe glass $800 (remember one year only!)
Convertible frame top, some rust, could be put in good shape easy $500 Sold awilson
Convertible frame top, excellent $800 Sold ikwhite
Hard Top, worn solid and no cracks. Still has the triangular chrome pieces! $600
Chrome (New and on car less then 100 miles)
Front bumber $200 (pending sale) Sold sihler
Rear Bumpers $400 SOLD
Front bumperettes $200 SOLD
Front hockey sticks $100
Chassis
Rolling chassis. Frame, appears to be a late , , see pics
Rolling chassis will consist of frame, wheels, front suspension and rear suspension including rear end, antissway, trailing arms, etc. no steering components. $2500 with clean title. No radiator Support, and front cross member (under radiator) is rusty. Frame is light surface rust only, but is bent about 1” on the left side where the frame rises just before the rear of the engine. Posted pics of this here before, everyone says $300 repair with a competent repair shop, but I can’t find anyone to do it and is probably the “straw that broke the camels back” for me deciding to not finish the project.
Mechanical
Engine less carb (see pics) 1968 427. $500
---pan to manifold, no accessories, will include harmonic dampner.
NOM Big Block. 1968 code. Old edelbrock intake, holly carb. Ran when parked, but its sat a while and probably could use a rebuild. Has a wicked cam, don’t know what, but I could barely get 10in of vacume. (pending sale)
Transmission (see pics) $300
Unknow at this point. It is a 4-speed but reverse is up and to the left! LOL.
sold
Original steering box $100
Rebuilt steering box $200
Spal aluminum rad and fans $600.
Serpentine kit with remote power steering res $300 SOLD!
Speed demon carb $200
Holly 4di port injection. Missing o2 sensor. Purchased used and never installed. $750 (new this is like $2500!)
Hooker super comp headers, coated, one slight depression put in one pipe to clear ps pump. $500 (over $700 new!!)
More to come as I dig through all my boxes!
Just some extra comments
Body off Frame
Front surround appears to have been replaced sometime in its history, fiberglass seems thin to me, but I was told the 1968 glass was thin compared to later years. Right front fender was damaged and repaired by previous owner.
Birdcage seems OK, but I have not torn it down all the way to inspect. At first it seemed bad, but it turned out that the molding around the windshield had metal reinforcement and THAT is what rusted, not the frame itself.
. Rear clip is in good shape, but repairs needed around wheel wells were it looks like someone ran tires that were to wide. The fender looks fine, but the “lip” is missing or cracked.
Suspension
Looks to me like previous owner redid entire suspension with VBP parts, but then the car sat a while.
New seat backs
Lots of new trim parts (latches bezels etc.)
I will take 10k for everything or whittle it away part by part. there is a LOT of new stuff, and extras with this car. I am in las vegas. I listed this before, but now I am serious about moving this thing out. I will take pics and all prices are negotiable. I have no ability to split the front/rear clips/birdcage, so if you want that, you have to come and get it. If you need something for a 68 that I didn't list, I probably have it LOL. Also, I am not sure what the title goes with, the body or the frame, anyone know? I have deleted my ph#, and email, because I think I am violating the rules, please don't pm me either because I think thats not allowed as well. Sorry for the confusion. some basic pics here http://forums.corvetteforum.com/show....php?t=1630267
Last edited by BigBadRed; 04-16-2007 at 08:04 PM.
#3
Bumpers
I'd like to buy the rear bumpers if shipping isn't too much. Can you send pictures and info to 71coupe@comcast.net?
thanks,
pm
thanks,
pm
#5
Race Director
Thread Starter
Member Since: May 2002
Location: Check this riff........
Posts: 14,376
Likes: 0
Received 1 Like
on
1 Post
I'd like to buy the rear bumpers if shipping isn't too much. Can you send pictures and info to 71coupe@comcast.net?
thanks,
pm
thanks,
pm
#7
Le Mans Master
thanks, the door jamb wedges consist of 2 small "wedges" that are attached to the door jamb (on body) and door. They meet when the door gets closed. They are on both doors /jambs, totalling 4 peices. They are about 1 inch tall apiece, and are held in place with screws, they are ususally painted over. I think one hald may be plastic, and the other is metal. I left you a voicemail with my # thanks, john
Last edited by avalonjohn; 04-04-2007 at 02:43 PM. Reason: spelling
#8
i may be interested in the carpet. how much is shipping to 49525?
this is the full carpet set, correct? front and back?
you wouldnt happen to also have the wooden steering wheel would you?
this is the full carpet set, correct? front and back?
you wouldnt happen to also have the wooden steering wheel would you?
#9
Race Director
Thread Starter
Member Since: May 2002
Location: Check this riff........
Posts: 14,376
Likes: 0
Received 1 Like
on
1 Post
John, will look for the wedges. Carpet is full set, and bought as "correct" although I am not an NCRS judge and wouldn't know the difference. Not wooden steering wheel. Have to get weights to calc shipping so give me a day to box up parts.
#11
Instructor
Member Since: Oct 2005
Location: Lafayette IN
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
I'd be interested in the engine and transmission...Can you give me any numbers off either? Maybe some numbers off the heads? Engine been bored over?
I'm in Lafayette, Indiana 47905. Would you be willing to ship?
Thanks
I'm in Lafayette, Indiana 47905. Would you be willing to ship?
Thanks
Last edited by ceweaver; 04-04-2007 at 04:39 PM.
#16
Instructor
Member Since: Oct 2005
Location: Lafayette IN
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Pics, right. Lucky for me, I can't view them at work. I will get back with you tomorrow.
Got an idea an crate/shipping? I've never had anything that big or heavy shipped any distance...
Got an idea an crate/shipping? I've never had anything that big or heavy shipped any distance...
#18
Race Director
Thread Starter
Member Since: May 2002
Location: Check this riff........
Posts: 14,376
Likes: 0
Received 1 Like
on
1 Post
should have shipping for you tomorrow. Do you know that 68 bumperettes are NOT the same as 69's. I am not sure what the rear interior quarter trim panel is, do you have a picture?
#20
The interior quarter trim panels are behind the seats against the body and are used to cover the gap between the carpet and door frame. They also cover the the hinge area of the soft top frame.