Parting out a 1975 Vette (Complete Car) DFW area.
#41
TheCorvetteBen
Thread Starter
PM sent
The seats are custom from the 70s. I doubt they are what you are looking for..., plus they are cloth where you sit, and leather in the back. kinda wierd
#43
#44
Pro
do you mind if they are not perfect? I mean they are straight and have no dents or scratches, but the crappy side pipes on the car had burned them a little. I can see if I can get them cleaned up. Also I have no hardware for them
Well I know that the passenger side fender has been hit and then bubba'd, but around the headlight looks to be good. Could you specify what area you need exaclty?
Well I know that the passenger side fender has been hit and then bubba'd, but around the headlight looks to be good. Could you specify what area you need exaclty?
#47
Instructor
Needs
I'm looking for the defroster grille, the small transition bracket that goes between the e-brake console and the center console and the black filler strip that covers the e-brake slot. Any of those still there ??
Thanks,
John
Thanks,
John
#48
TheCorvetteBen
Thread Starter
all that stuff is long gone. I dont even have some of that stuff on my nice 75...
#51
TheCorvetteBen
Thread Starter
#53
TheCorvetteBen
Thread Starter
#55
Instructor
Is the windshield the original LOF glass? If so, do you know what the date code is on the glass?
Also, I'm looking for the black plastic grille that goes over the cowl induction flapper at the back side of the hood.
I probably need other stuff but that's what I can think of off the top of my head.
Also, I'm looking for the black plastic grille that goes over the cowl induction flapper at the back side of the hood.
I probably need other stuff but that's what I can think of off the top of my head.
#56
TheCorvetteBen
Thread Starter
Is the windshield the original LOF glass? If so, do you know what the date code is on the glass?
Also, I'm looking for the black plastic grille that goes over the cowl induction flapper at the back side of the hood.
I probably need other stuff but that's what I can think of off the top of my head.
Also, I'm looking for the black plastic grille that goes over the cowl induction flapper at the back side of the hood.
I probably need other stuff but that's what I can think of off the top of my head.
#58
TheCorvetteBen
Thread Starter
#60
Intermediate
Brake light switch bracket
I am in need of the bracket which holds the stop light switch on a 1969-1975 (76 or 77 may work also) Corvette. It is the bracket that bolts to the brake pedel housing with 2 small bolts and actually holds the brake light switch (not the bracket that mounts on the pedel to push the button). I am converting from a 1968 brake light switch to the later one because of a steering column change (putting a 1973 Tilt Telescopic steering column in my custom '68) and a wiring harness change (to go along with the column change and I cannot believe I cannot find this part. I have located every other part imaginable for this car except this one. If any of you have this on a parts car, I would really like to buy it before I try and fabricate one.