FS - 69 Complete Body/Birdcage with Front Clip, Doors, and glass
06-09-2013, 01:53 PM
#1
Instructor
Thread Starter
Member Since: Dec 2009
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
FS - 69 Complete Body/Birdcage with Front Clip, Doors, and glass
SEPTEMBER 8 NEW PRICE - $550 for remaining rear clip and T-tops.
Having sold my rolling chassis, it's now time to move the body. It's a complete '69 body;
- complete rear half with bird cage
- both doors with power window inerds and hinges
- AND both windows in good condition and apparently original
- Original rear pop out window,
- firewall,
- wiper door and assembly with rebuild parts
- and complete front clip with brand new support bracket not installed yet.
June 30 edit - comes with original windshield
Will also include; completely restored clutch/brake pedal assembly and complete brand new vacuum hose kit.
6-17 Edit. Will also include:
- all the stainless t-top body trim
- full dash assembly with gauges and ductwork
- e-brake handle and assembly
- original shifter
- Brand new Eckler's small diameter leather steering wheel
- all interior trim
- heater core and full heater assembly
- original wiring harnesses
Asking $1,599 for all of it. Condition description below.
Body and bird cage in decent shape - not perfect. Some body touch up needed prior to paint. Birdcage has had some rust repair work done around the windshield frame. Typical rot spots not horrible, but I would repair; front body mount areas and rockers channels. All very repairable and part of why the price for the whole thing is so cheap.
Aftermarket 68/69 front clip with lower valence panel with inner fender skirts. In good condition, except driver's inner fender skirt needs a little bit of work.
Doors are in good shape as is the glass. Power windows worked prior to disassembly.
Rear door glass in decent shape with some age related scratches that are tough to see but there. Can be polished out.
Pictures below, can make more if requested.
Having sold my rolling chassis, it's now time to move the body. It's a complete '69 body;
- complete rear half with bird cage
- both doors with power window inerds and hinges
- AND both windows in good condition and apparently original
- Original rear pop out window,
- firewall,
- wiper door and assembly with rebuild parts
- and complete front clip with brand new support bracket not installed yet.
June 30 edit - comes with original windshield
Will also include; completely restored clutch/brake pedal assembly and complete brand new vacuum hose kit.
6-17 Edit. Will also include:
- all the stainless t-top body trim
- full dash assembly with gauges and ductwork
- e-brake handle and assembly
- original shifter
- Brand new Eckler's small diameter leather steering wheel
- all interior trim
- heater core and full heater assembly
- original wiring harnesses
Asking $1,599 for all of it. Condition description below.
Body and bird cage in decent shape - not perfect. Some body touch up needed prior to paint. Birdcage has had some rust repair work done around the windshield frame. Typical rot spots not horrible, but I would repair; front body mount areas and rockers channels. All very repairable and part of why the price for the whole thing is so cheap.
Aftermarket 68/69 front clip with lower valence panel with inner fender skirts. In good condition, except driver's inner fender skirt needs a little bit of work.
Doors are in good shape as is the glass. Power windows worked prior to disassembly.
Rear door glass in decent shape with some age related scratches that are tough to see but there. Can be polished out.
Pictures below, can make more if requested.
Last edited by Stingray Man; 09-08-2013 at 05:25 PM.
06-18-2013, 10:58 AM
#5
Instructor
Thread Starter
Member Since: Dec 2009
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Will also include:
- all the stainless t-top body trim
- full dash assembly with gauges and ductwork
- e-brake handle and assembly
- original shifter
- Brand new Eckler's small diameter leather steering wheel
- all interior trim
- heater core and full heater assembly
- original wiring harnesses
- all the stainless t-top body trim
- full dash assembly with gauges and ductwork
- e-brake handle and assembly
- original shifter
- Brand new Eckler's small diameter leather steering wheel
- all interior trim
- heater core and full heater assembly
- original wiring harnesses
06-19-2013, 09:09 AM
#7
Instructor
Thread Starter
Member Since: Dec 2009
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
With the chassis sold, the body is sitting on my garage floor. It would fit easily on a trailer and four of us were able to fairly easily lift the back half and move it around. Of course, the front clip is much lighter.
