'68--'72 parts
#1
Former Vendor
Thread Starter
'68--'72 parts
Rear bumpers, better condition than photo shows, these can be used as nice drivers, no rust, not bent, originals.
$75.00 per have several
Have all bumper brackets $5.00 to $10.00 per
Removable rear glass storage trays--fiberboard.
Both need repair, but both work as is.
$45.00 per
Have a set of spring hinges for these---$40.00 pair
'68/9 floor coupe pan/trans tunnel/rear clip halo.
$150.00 (pick up only)
Spare tire tubs and lids.
Nice ones (no cracks or rash) $100.00
Ones with cracks or small damage---$60.00
Have mounting hardware---'68 only $70.00---'69/'75 $35.00
Rally wheels, 15x8, original, mixed dates, all AZ---$50.00 per
Some aluminum slot wheels, 15", various widths (8", 8 1/2", 10", maybe some wider?)--$50.00 per
Chromed "Daiseys" 15x10 --$50.00 per
'68 birdcage. nice, no rust, excellent rocker channels and posts. Has had the windshield frame removed.
$250.00 (pick up only)
Windshield wiper door pieces and complete units (some '68 only, some for '69-'72)
Grills-----------$100.00
Doors----------$125.00
Mechanisms----$225.00
Long stainless--$100.00
Fender caps----$50.00 pair---$75 pair for '68
Coffee can actuators--$50.00 --$100.00 depending on condition of plating (all work)
Pie pan actuators $ same as above
Misc. brackets --$5.00 to $10.00
'68 wiper arms--$50.00 per Do not have any '69 arms with brass tubes)
Wiper transmissions--$75.00
'68 wiper motors---$100.00 per
'69 wiper motors with headlight washer set up---$250.00
all components for under dash controls (pull down switches, override switches, mounting brackets---$5.00 to $40.00
Dash mounted wiper switches---$20.00
'68 only upper vent bezels (where wiper switch mounts) $50.00 also have '69-'75
Solenoid behind tachometer---$50.00 (all tested and work)
Vents, ducting, fans, vacuum reservoirs--$15.00 to $80.00
Front and rear sway bars (different sizes, not all photographed)--$50.00 to $100.00
4-speed and automatic pedal assemblies ('68 and '69-'75)
'68 4-speed--$150.00
all others---- $125.00
'68 only brake light switch---$125.00
Complete rear---1969 427 Heavy duty positraction ---assembled, rebuilt---center posi, half shafts, trailing arm assemblies, rear spring, upper cross-member, rear sway bar, rear calipers, shocks.
This is an FA coded 3:70.1 posi with 7 leaf rear spring and bolted half-shafts (not the "U" strap attachment).
Asking $1,500.00 (can ship, but large and heavy and require crating)
Fiberboard rear compartment doors---$20.00 to $35.00 per
Trailing arm assemblies, A-Arms, Power Brake Boosters, Front spindle assemblies (small --'68 and earlier)---$50.00 t0 $250.00 (not all shown in photograph)
Center caps for ralley wheels, all original, most in excellent condition, some need paint touch-up.
1) nice ones---$30.00
2) good drivers-$20.00
3) needing touch-up--$15.00
Have 40 or 50 of these.
Trim rings--have 50 or so
New in the box GM issue with clips rotated off of valve stem hole--$100.00 per or $350.00 for set of four (OBO)
Nice originals---(early design) --$125.00 per
small dents or curb rash early originals--$50.00 per
Nice 2nd design originals-----$ 100.00 per
Driver 2nd design originals---$ 40.00 per
After market rings--$10.00 per
Exhaust pipes and mufflers (new), some 2" some 2 1/2"---$30.00 to $60.00 Many more not photoed.
Gas tanks (with and without return line nipples), filler neck assemblies, vented and non vented caps, many more not shown.
Some look as new, but even the ones with light surface (on outside only) are clean and sound.
1) Tanks---$75.00
2) filler neck assemblies--$50.00
3) caps) ---$10.00 to $50.00
Also have straps, original bolts, tank support brackets, and fuel door lids/assemblies (sorry no Original '68 only doors with emblem rivets in place).
Original tail light panels (have 4 or 5)---$225.00 per
'68 frame with rear trailing arm assemblies. Cowl back coupe body, nice windshield frame, rockers, up-rights. Rear fenders and tail light panel removed.
Straight frame, surface rust, (think this is a 4 speed frame, covered in my shipping boxes now)----Asking $2,000.00 with body, $1,500.00 without OBO. Also have nice set of '68 doors
Oil Pans---$50.00 to $250.00
Front and rear bumper brackets, extensions, etc. (not all shown)---$5.00 to $50.00 per
Front bumpers and bumpperettes----$100.00 to $400.00
Rear springs
1) 7 leaf from a '67 big block---$125.00
2) 9 leafs ---$75.00
Transmissions (look up my other ads for complete coding) $550.-- to $750.00
Early dated '68 (1967 dates for a '68 427) big block water pump, alternator and starter.
1)---SOLD--- water pump---$125.00---SOLD---have two more
2) alternator-----$200.00
3)---SOLD--- starter--------$200.00---SOLD
'69 original side pipe pieces and parts including good insulators, some pieces re-chromed)----$50.00 to $200.00 (not all pieces shown)
'69 to '75 steering wheels----$50.00 to $100.00 (not all shown).
Wiring harnesses, '68 and '69, a/c and non, all with good fiber optics and all complete.
1) engine----$50.00
2) front light w/optics---$125.00
3) '68 dash with a/c-----$200.00
4) '68 dash w/o a/c-----$175.00
5) '69 dash with a/c----$175.00
6) '69 dash w/o a/c-----$150.00
7) '68 and/or '69 rear lights with fiber optics---$100.00
Have mics harnesses---p/w, '68 rear interior lights with housings/lenses, clips, sockets, plugs, etc., etc.
More to come,
George
210 748 4693[IMG]resource://skype_ff_extension-at-jetpack/skype_ff_extension/data/call_skype_logo.png[/IMG]210 748 4693
geopar@gvtc.comCall
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype
$75.00 per have several
Have all bumper brackets $5.00 to $10.00 per
Removable rear glass storage trays--fiberboard.
Both need repair, but both work as is.
$45.00 per
Have a set of spring hinges for these---$40.00 pair
'68/9 floor coupe pan/trans tunnel/rear clip halo.
$150.00 (pick up only)
Spare tire tubs and lids.
Nice ones (no cracks or rash) $100.00
Ones with cracks or small damage---$60.00
Have mounting hardware---'68 only $70.00---'69/'75 $35.00
Rally wheels, 15x8, original, mixed dates, all AZ---$50.00 per
Some aluminum slot wheels, 15", various widths (8", 8 1/2", 10", maybe some wider?)--$50.00 per
Chromed "Daiseys" 15x10 --$50.00 per
'68 birdcage. nice, no rust, excellent rocker channels and posts. Has had the windshield frame removed.
$250.00 (pick up only)
Windshield wiper door pieces and complete units (some '68 only, some for '69-'72)
Grills-----------$100.00
Doors----------$125.00
Mechanisms----$225.00
Long stainless--$100.00
Fender caps----$50.00 pair---$75 pair for '68
Coffee can actuators--$50.00 --$100.00 depending on condition of plating (all work)
Pie pan actuators $ same as above
Misc. brackets --$5.00 to $10.00
'68 wiper arms--$50.00 per Do not have any '69 arms with brass tubes)
Wiper transmissions--$75.00
'68 wiper motors---$100.00 per
'69 wiper motors with headlight washer set up---$250.00
all components for under dash controls (pull down switches, override switches, mounting brackets---$5.00 to $40.00
Dash mounted wiper switches---$20.00
'68 only upper vent bezels (where wiper switch mounts) $50.00 also have '69-'75
Solenoid behind tachometer---$50.00 (all tested and work)
Vents, ducting, fans, vacuum reservoirs--$15.00 to $80.00
Front and rear sway bars (different sizes, not all photographed)--$50.00 to $100.00
4-speed and automatic pedal assemblies ('68 and '69-'75)
'68 4-speed--$150.00
all others---- $125.00
'68 only brake light switch---$125.00
Complete rear---1969 427 Heavy duty positraction ---assembled, rebuilt---center posi, half shafts, trailing arm assemblies, rear spring, upper cross-member, rear sway bar, rear calipers, shocks.
This is an FA coded 3:70.1 posi with 7 leaf rear spring and bolted half-shafts (not the "U" strap attachment).
Asking $1,500.00 (can ship, but large and heavy and require crating)
Fiberboard rear compartment doors---$20.00 to $35.00 per
Trailing arm assemblies, A-Arms, Power Brake Boosters, Front spindle assemblies (small --'68 and earlier)---$50.00 t0 $250.00 (not all shown in photograph)
Center caps for ralley wheels, all original, most in excellent condition, some need paint touch-up.
1) nice ones---$30.00
2) good drivers-$20.00
3) needing touch-up--$15.00
Have 40 or 50 of these.
Trim rings--have 50 or so
New in the box GM issue with clips rotated off of valve stem hole--$100.00 per or $350.00 for set of four (OBO)
Nice originals---(early design) --$125.00 per
small dents or curb rash early originals--$50.00 per
Nice 2nd design originals-----$ 100.00 per
Driver 2nd design originals---$ 40.00 per
After market rings--$10.00 per
Exhaust pipes and mufflers (new), some 2" some 2 1/2"---$30.00 to $60.00 Many more not photoed.
Gas tanks (with and without return line nipples), filler neck assemblies, vented and non vented caps, many more not shown.
Some look as new, but even the ones with light surface (on outside only) are clean and sound.
1) Tanks---$75.00
2) filler neck assemblies--$50.00
3) caps) ---$10.00 to $50.00
Also have straps, original bolts, tank support brackets, and fuel door lids/assemblies (sorry no Original '68 only doors with emblem rivets in place).
Original tail light panels (have 4 or 5)---$225.00 per
'68 frame with rear trailing arm assemblies. Cowl back coupe body, nice windshield frame, rockers, up-rights. Rear fenders and tail light panel removed.
Straight frame, surface rust, (think this is a 4 speed frame, covered in my shipping boxes now)----Asking $2,000.00 with body, $1,500.00 without OBO. Also have nice set of '68 doors
Oil Pans---$50.00 to $250.00
Front and rear bumper brackets, extensions, etc. (not all shown)---$5.00 to $50.00 per
Front bumpers and bumpperettes----$100.00 to $400.00
Rear springs
1) 7 leaf from a '67 big block---$125.00
2) 9 leafs ---$75.00
Transmissions (look up my other ads for complete coding) $550.-- to $750.00
Early dated '68 (1967 dates for a '68 427) big block water pump, alternator and starter.
1)---SOLD--- water pump---$125.00---SOLD---have two more
2) alternator-----$200.00
3)---SOLD--- starter--------$200.00---SOLD
'69 original side pipe pieces and parts including good insulators, some pieces re-chromed)----$50.00 to $200.00 (not all pieces shown)
'69 to '75 steering wheels----$50.00 to $100.00 (not all shown).
Wiring harnesses, '68 and '69, a/c and non, all with good fiber optics and all complete.
1) engine----$50.00
2) front light w/optics---$125.00
3) '68 dash with a/c-----$200.00
4) '68 dash w/o a/c-----$175.00
5) '69 dash with a/c----$175.00
6) '69 dash w/o a/c-----$150.00
7) '68 and/or '69 rear lights with fiber optics---$100.00
Have mics harnesses---p/w, '68 rear interior lights with housings/lenses, clips, sockets, plugs, etc., etc.
More to come,
George
210 748 4693[IMG]resource://skype_ff_extension-at-jetpack/skype_ff_extension/data/call_skype_logo.png[/IMG]210 748 4693
geopar@gvtc.comCall
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype
Last edited by Corvettes by George; 03-29-2015 at 07:40 AM.
#2
Former Vendor
Thread Starter
More:
'68 tail light and brake light lenses.
1) One in excellent condition, no cracks, nice stainless----$35.00 per
2) ones with minor cracks, nice stainless---$ 20.00 per
3) '69, '70, '71/2 also available.
Shift plates------$25.00 to $100.00
Some '68 only, some '69 ---'75
Mirrors, some early, some dated, some right hand side---$20.00 to $50.00
Radiator brackets---$5.00 to $15.00
Hood props, all original, most in excellent condition---$30.00 to $70.00
Many speedos and tachs, come '68, some '69 and up, different redlines.
$50.00 to $100.00
Door hinges:
early '68-----$25.00 to $50.00
'69 up-------$20.00 to $40.00
'71 parking light grill, nice except for corner piece broken. $75.00?
Inner door access plates---$15.00 for large, $7.00 for small
New re-built 454 (two bolt), steel crank, roller cam, 392 aluminum heads.
Long block-----$3,800.00
Short block----$1,800.00
Old two piece scatter shield with protect plate----$250.00
Front license plate holders, some new, all excellent----$10.00
T-Top stainless-------$20.00 to $50.00
Center consoles, extensions, kick panels, door panels, rear quarter panels and trim, rear window hardware, etc..
'68 and '69 head rest seats. All with good frames/springs/tracks, all need covers, some need foam, some headrests perfect, some need covers.
$250.00 per seat with tracks (needing covers and maybe foam)
$150.00 per nice headrest
$100.00 per headrest needing cover
T-Tops:
'68 with nice head liners----$250.00 pair
'68 without or "in need" head liners---$200.00 pair
'69 up with good liners----$200.00 pair
'69 up without or "in need" liners---$150.00 pair
Nice head liners (original)---$35.00 each
Lower left and right dash panels:
'68 left------$200.00
'68 right-----$100.00
'69 up left---$150.00
'69 up right--$75.00
Center grills:
'70-'72----$175.00
'73/'74 parking light grills---$50.00 per or $80.00 pair
Big Block with a/c expansion tank (original)--$200.00
Seat belt guides:
'68 (four hole)----$85.00 per
'69 (three hole, and maybe late '68)---$70.00 per
1970 side fender grills ('70 only), nice condition----$250.00 pair
Big block or LT1 hood inserts, nice pair----$100.00
slightly pitted but shinny pair------------$50.00
1969 fender gills chrome inserts, nice---$150.00 set (have two sets)
Power window motors (working)---$35.00 per
Comfort weave sun visors----$15.00 per
Exhaust manifolds (2"), some smog, some not.---$50.00 per
1968 843 aluminum heads, dated late '67, excellent condition, rebuilt, new springs/valves, etc., pressure tested, ready to go. Some repairs as is usual--$2,400.00
Just for fun:
new, never fired 383 with aluminum heads and performance auto trans:
Engine and trans combo----$4,500.00
engine alone---------------$3,500.00
See my old post for complete details
'64 327 365 (solid lifter) long block-------$2,500.00 obo
Can supply '64 FI unit for this engine
1950 (finned top) FI unit with distributor. Has been polished---$4.200.00
1968 corvette 427/390 HP engine (original). No intake/carb/dist.-----$2,800.00
See mt earlier posts to get complete information and more photos.
In the background:
Under wraps:
More to come:
geopar@gvtc.com
210 748 4693
'68 tail light and brake light lenses.
1) One in excellent condition, no cracks, nice stainless----$35.00 per
2) ones with minor cracks, nice stainless---$ 20.00 per
3) '69, '70, '71/2 also available.
Shift plates------$25.00 to $100.00
Some '68 only, some '69 ---'75
Mirrors, some early, some dated, some right hand side---$20.00 to $50.00
Radiator brackets---$5.00 to $15.00
Hood props, all original, most in excellent condition---$30.00 to $70.00
Many speedos and tachs, come '68, some '69 and up, different redlines.
$50.00 to $100.00
Door hinges:
early '68-----$25.00 to $50.00
'69 up-------$20.00 to $40.00
'71 parking light grill, nice except for corner piece broken. $75.00?
Inner door access plates---$15.00 for large, $7.00 for small
New re-built 454 (two bolt), steel crank, roller cam, 392 aluminum heads.
Long block-----$3,800.00
Short block----$1,800.00
Old two piece scatter shield with protect plate----$250.00
Front license plate holders, some new, all excellent----$10.00
T-Top stainless-------$20.00 to $50.00
Center consoles, extensions, kick panels, door panels, rear quarter panels and trim, rear window hardware, etc..
'68 and '69 head rest seats. All with good frames/springs/tracks, all need covers, some need foam, some headrests perfect, some need covers.
$250.00 per seat with tracks (needing covers and maybe foam)
$150.00 per nice headrest
$100.00 per headrest needing cover
T-Tops:
'68 with nice head liners----$250.00 pair
'68 without or "in need" head liners---$200.00 pair
'69 up with good liners----$200.00 pair
'69 up without or "in need" liners---$150.00 pair
Nice head liners (original)---$35.00 each
Lower left and right dash panels:
'68 left------$200.00
'68 right-----$100.00
'69 up left---$150.00
'69 up right--$75.00
Center grills:
'70-'72----$175.00
'73/'74 parking light grills---$50.00 per or $80.00 pair
Big Block with a/c expansion tank (original)--$200.00
Seat belt guides:
'68 (four hole)----$85.00 per
'69 (three hole, and maybe late '68)---$70.00 per
1970 side fender grills ('70 only), nice condition----$250.00 pair
Big block or LT1 hood inserts, nice pair----$100.00
slightly pitted but shinny pair------------$50.00
1969 fender gills chrome inserts, nice---$150.00 set (have two sets)
Power window motors (working)---$35.00 per
Comfort weave sun visors----$15.00 per
Exhaust manifolds (2"), some smog, some not.---$50.00 per
1968 843 aluminum heads, dated late '67, excellent condition, rebuilt, new springs/valves, etc., pressure tested, ready to go. Some repairs as is usual--$2,400.00
Just for fun:
new, never fired 383 with aluminum heads and performance auto trans:
Engine and trans combo----$4,500.00
engine alone---------------$3,500.00
See my old post for complete details
'64 327 365 (solid lifter) long block-------$2,500.00 obo
Can supply '64 FI unit for this engine
1950 (finned top) FI unit with distributor. Has been polished---$4.200.00
1968 corvette 427/390 HP engine (original). No intake/carb/dist.-----$2,800.00
See mt earlier posts to get complete information and more photos.
In the background:
Under wraps:
More to come:
geopar@gvtc.com
210 748 4693
#3
Exhaust manifolds (2"), some smog, some not.---$50.00 per
More to come:
geopar@gvtc.com
210 748 4693[/QUOTE]
Hello George
I am looking for 3932461 small block exhaust manifold dated A to E
Also is the door panels original. Looking for Black door panels for a 70
Do you want to sell the 70 LT1 carb?? 400.00 shipped?
I emailed and left you several messages, but not heard back from you.
Let me know and I will try to lighten your collection of parts.
Grant
More to come:
geopar@gvtc.com
210 748 4693[/QUOTE]
Hello George
I am looking for 3932461 small block exhaust manifold dated A to E
Also is the door panels original. Looking for Black door panels for a 70
Do you want to sell the 70 LT1 carb?? 400.00 shipped?
I emailed and left you several messages, but not heard back from you.
Let me know and I will try to lighten your collection of parts.
Grant
#5
water pump
More:
'68 tail light and brake light lenses.
1) One in excellent condition, no cracks, nice stainless----$35.00 per
2) ones with minor cracks, nice stainless---$ 20.00 per
3) '69, '70, '71/2 also available.
Shift plates------$25.00 to $100.00
Some '68 only, some '69 ---'75
Mirrors, some early, some dated, some right hand side---$20.00 to $50.00
Radiator brackets---$5.00 to $15.00
Hood props, all original, most in excellent condition---$30.00 to $70.00
Many speedos and tachs, come '68, some '69 and up, different redlines.
$50.00 to $100.00
Door hinges:
early '68-----$25.00 to $50.00
'69 up-------$20.00 to $40.00
'71 parking light grill, nice except for corner piece broken. $75.00?
Inner door access plates---$15.00 for large, $7.00 for small
New re-built 454 (two bolt), steel crank, roller cam, 392 aluminum heads.
Long block-----$3,800.00
Short block----$1,800.00
Old two piece scatter shield with protect plate----$250.00
Front license plate holders, some new, all excellent----$10.00
T-Top stainless-------$20.00 to $50.00
Center consoles, extensions, kick panels, door panels, rear quarter panels and trim, rear window hardware, etc..
'68 and '69 head rest seats. All with good frames/springs/tracks, all need covers, some need foam, some headrests perfect, some need covers.
$250.00 per seat with tracks (needing covers and maybe foam)
$150.00 per nice headrest
$100.00 per headrest needing cover
T-Tops:
'68 with nice head liners----$250.00 pair
'68 without or "in need" head liners---$200.00 pair
'69 up with good liners----$200.00 pair
'69 up without or "in need" liners---$150.00 pair
Nice head liners (original)---$35.00 each
Lower left and right dash panels:
'68 left------$200.00
'68 right-----$100.00
'69 up left---$150.00
'69 up right--$75.00
Center grills:
'70-'72----$175.00
'73/'74 parking light grills---$50.00 per or $80.00 pair
Big Block with a/c expansion tank (original)--$200.00
Seat belt guides:
'68 (four hole)----$85.00 per
'69 (three hole, and maybe late '68)---$70.00 per
1970 side fender grills ('70 only), nice condition----$250.00 pair
Big block or LT1 hood inserts, nice pair----$100.00
slightly pitted but shinny pair------------$50.00
1969 fender gills chrome inserts, nice---$150.00 set (have two sets)
Power window motors (working)---$35.00 per
Comfort weave sun visors----$15.00 per
Exhaust manifolds (2"), some smog, some not.---$50.00 per
1968 843 aluminum heads, dated late '67, excellent condition, rebuilt, new springs/valves, etc., pressure tested, ready to go. Some repairs as is usual--$2,400.00
Just for fun:
new, never fired 383 with aluminum heads and performance auto trans:
Engine and trans combo----$4,500.00
engine alone---------------$3,500.00
See my old post for complete details
'64 327 365 (solid lifter) long block-------$2,500.00 obo
Can supply '64 FI unit for this engine
1950 (finned top) FI unit with distributor. Has been polished---$4.200.00
1968 corvette 427/390 HP engine (original). No intake/carb/dist.-----$2,800.00
See mt earlier posts to get complete information and more photos.
In the background:
Under wraps:
More to come:
geopar@gvtc.com
210 748 4693
'68 tail light and brake light lenses.
1) One in excellent condition, no cracks, nice stainless----$35.00 per
2) ones with minor cracks, nice stainless---$ 20.00 per
3) '69, '70, '71/2 also available.
Shift plates------$25.00 to $100.00
Some '68 only, some '69 ---'75
Mirrors, some early, some dated, some right hand side---$20.00 to $50.00
Radiator brackets---$5.00 to $15.00
Hood props, all original, most in excellent condition---$30.00 to $70.00
Many speedos and tachs, come '68, some '69 and up, different redlines.
$50.00 to $100.00
Door hinges:
early '68-----$25.00 to $50.00
'69 up-------$20.00 to $40.00
'71 parking light grill, nice except for corner piece broken. $75.00?
Inner door access plates---$15.00 for large, $7.00 for small
New re-built 454 (two bolt), steel crank, roller cam, 392 aluminum heads.
Long block-----$3,800.00
Short block----$1,800.00
Old two piece scatter shield with protect plate----$250.00
Front license plate holders, some new, all excellent----$10.00
T-Top stainless-------$20.00 to $50.00
Center consoles, extensions, kick panels, door panels, rear quarter panels and trim, rear window hardware, etc..
'68 and '69 head rest seats. All with good frames/springs/tracks, all need covers, some need foam, some headrests perfect, some need covers.
$250.00 per seat with tracks (needing covers and maybe foam)
$150.00 per nice headrest
$100.00 per headrest needing cover
T-Tops:
'68 with nice head liners----$250.00 pair
'68 without or "in need" head liners---$200.00 pair
'69 up with good liners----$200.00 pair
'69 up without or "in need" liners---$150.00 pair
Nice head liners (original)---$35.00 each
Lower left and right dash panels:
'68 left------$200.00
'68 right-----$100.00
'69 up left---$150.00
'69 up right--$75.00
Center grills:
'70-'72----$175.00
'73/'74 parking light grills---$50.00 per or $80.00 pair
Big Block with a/c expansion tank (original)--$200.00
Seat belt guides:
'68 (four hole)----$85.00 per
'69 (three hole, and maybe late '68)---$70.00 per
1970 side fender grills ('70 only), nice condition----$250.00 pair
Big block or LT1 hood inserts, nice pair----$100.00
slightly pitted but shinny pair------------$50.00
1969 fender gills chrome inserts, nice---$150.00 set (have two sets)
Power window motors (working)---$35.00 per
Comfort weave sun visors----$15.00 per
Exhaust manifolds (2"), some smog, some not.---$50.00 per
1968 843 aluminum heads, dated late '67, excellent condition, rebuilt, new springs/valves, etc., pressure tested, ready to go. Some repairs as is usual--$2,400.00
Just for fun:
new, never fired 383 with aluminum heads and performance auto trans:
Engine and trans combo----$4,500.00
engine alone---------------$3,500.00
See my old post for complete details
'64 327 365 (solid lifter) long block-------$2,500.00 obo
Can supply '64 FI unit for this engine
1950 (finned top) FI unit with distributor. Has been polished---$4.200.00
1968 corvette 427/390 HP engine (original). No intake/carb/dist.-----$2,800.00
See mt earlier posts to get complete information and more photos.
In the background:
Under wraps:
More to come:
geopar@gvtc.com
210 748 4693
#7
do you have a pass. side 69 door panel? manual windows. black preferably.
how about an edelbrock performer airgap (#2601 or one of its variants)
drivers side chrome hooker side tube?
how about an edelbrock performer airgap (#2601 or one of its variants)
drivers side chrome hooker side tube?
#8
Melting Slicks
Wow, you have got some parts!!!
Wow, you have got some parts!!!
Worth a trip to Houston to go shopping, better than going to Walmart!
Do you have:
1. driver side front grill for 70 -72? not worried about fiber optic connection or lens color, need not broken and decent driver chrome, not peeling
2. one 72 black leather seat bottom cover, decent driver shape, no holes or cracks throughs, think driver or passenger side either would work.
3. Seat belt guide for 72 that bolts to the floor, looks like an aluminum boat handle, only need one.
Thanks and will pass your post along to the other Louisiana parts nuts!
Worth a trip to Houston to go shopping, better than going to Walmart!
Do you have:
1. driver side front grill for 70 -72? not worried about fiber optic connection or lens color, need not broken and decent driver chrome, not peeling
2. one 72 black leather seat bottom cover, decent driver shape, no holes or cracks throughs, think driver or passenger side either would work.
3. Seat belt guide for 72 that bolts to the floor, looks like an aluminum boat handle, only need one.
Thanks and will pass your post along to the other Louisiana parts nuts!
#9
Former Vendor
Thread Starter
Wow, you have got some parts!!!
Worth a trip to Houston to go shopping, better than going to Walmart!
This Spring Branch is North of San Antonio.
Do you have:
1. driver side front grill for 70 -72? not worried about fiber optic connection or lens color, need not broken and decent driver chrome, not peeling
Only one I have for sale has very nice chrome but has small end piece broken (it's in the photos).
2. one 72 black leather seat bottom cover, decent driver shape, no holes or cracks throughs, think driver or passenger side either would work.
No leather seat bottoms.
3. Seat belt guide for 72 that bolts to the floor, looks like an aluminum boat handle, only need one.
May have this--there were two different lengths used--let me know which length you need.
Thanks and will pass your post along to the other Louisiana parts nuts!
Worth a trip to Houston to go shopping, better than going to Walmart!
This Spring Branch is North of San Antonio.
Do you have:
1. driver side front grill for 70 -72? not worried about fiber optic connection or lens color, need not broken and decent driver chrome, not peeling
Only one I have for sale has very nice chrome but has small end piece broken (it's in the photos).
2. one 72 black leather seat bottom cover, decent driver shape, no holes or cracks throughs, think driver or passenger side either would work.
No leather seat bottoms.
3. Seat belt guide for 72 that bolts to the floor, looks like an aluminum boat handle, only need one.
May have this--there were two different lengths used--let me know which length you need.
Thanks and will pass your post along to the other Louisiana parts nuts!
G
#10
Exhaust manifolds (2"), some smog, some not.---$50.00 per
More to come:
geopar@gvtc.com
210 748 4693[/QUOTE]
Hello George
Can you let me know on the exhaust manifold and the carb. Still waiting for your reply. Send me an email if you can.
I am looking for 3932461 small block exhaust manifold dated A to E
Also is the door panels original. Looking for Black door panels for a 70
Do you want to sell the 70 LT1 carb?? 400.00 shipped?
I emailed and left you several messages, but not heard back from you.
Let me know and I will try to lighten your collection of parts.
Grant
More to come:
geopar@gvtc.com
210 748 4693[/QUOTE]
Hello George
Can you let me know on the exhaust manifold and the carb. Still waiting for your reply. Send me an email if you can.
I am looking for 3932461 small block exhaust manifold dated A to E
Also is the door panels original. Looking for Black door panels for a 70
Do you want to sell the 70 LT1 carb?? 400.00 shipped?
I emailed and left you several messages, but not heard back from you.
Let me know and I will try to lighten your collection of parts.
Grant
#11
Melting Slicks
Originally Posted by 20mercury View Post
Wow, you have got some parts!!!
Worth a trip to Houston to go shopping, better than going to Walmart!
This Spring Branch is North of San Antonio.
Do you have:
1. driver side front grill for 70 -72? not worried about fiber optic connection or lens color, need not broken and decent driver chrome, not peeling
Only one I have for sale has very nice chrome but has small end piece broken (it's in the photos).
2. one 72 black leather seat bottom cover, decent driver shape, no holes or cracks throughs, think driver or passenger side either would work.
No leather seat bottoms.
3. Seat belt guide for 72 that bolts to the floor, looks like an aluminum boat handle, only need one.
May have this--there were two different lengths used--let me know which length you need.
Thanks and will pass your post along to the other Louisiana parts nuts!
Thanks,
G
Thanks for the response. I need one seat belt guide with the holes 8" center to center. I will send you a PM too.
Wow, you have got some parts!!!
Worth a trip to Houston to go shopping, better than going to Walmart!
This Spring Branch is North of San Antonio.
Do you have:
1. driver side front grill for 70 -72? not worried about fiber optic connection or lens color, need not broken and decent driver chrome, not peeling
Only one I have for sale has very nice chrome but has small end piece broken (it's in the photos).
2. one 72 black leather seat bottom cover, decent driver shape, no holes or cracks throughs, think driver or passenger side either would work.
No leather seat bottoms.
3. Seat belt guide for 72 that bolts to the floor, looks like an aluminum boat handle, only need one.
May have this--there were two different lengths used--let me know which length you need.
Thanks and will pass your post along to the other Louisiana parts nuts!
Thanks,
G
Thanks for the response. I need one seat belt guide with the holes 8" center to center. I will send you a PM too.
#13
Instructor
Are the fender louver (gill) inserts a complete LEFT/RIGHT set (8 inserts)?
If so, put me down for 'em. Also for the latest 69 driver's mirror in nice shape.
Chris
If so, put me down for 'em. Also for the latest 69 driver's mirror in nice shape.
Chris
#14
Former Vendor
Thread Starter
Send $200.00 for inserts, mirror and shipping to my PayPal at geopar@gvtc.com
#16
Instructor
Yes, complete, 8 pieces (4 left and 4 right).
Send $200.00 for inserts, mirror and shipping to my PayPal at geopar@gvtc.com
Send $200.00 for inserts, mirror and shipping to my PayPal at geopar@gvtc.com
#18
Former Vendor
Thread Starter
Did you send a second PM?
I answered your question in the post two above this one.
G
geopar@gvtc.com
I answered your question in the post two above this one.
G
geopar@gvtc.com
#19
Instructor
#20
Did you send a second PM?
I answered your question in the post two above this one.
G
geopar@gvtc.com
I answered your question in the post two above this one.
G
geopar@gvtc.com
Can you let me know of my questions below. If you have the exhaust manifold dated A to E then I can take it but with smog holes. I can also buy the April carb for the LT1
I can send you paypal. Just let me know.
I am going fishing tomorrow and be back on Tuesday but If you can email me that would be great too. Same email address when you sent me a picture of the 72 Lt1 hood
Grant
Exhaust manifolds (2"), some smog, some not.---$50.00 per
More to come:
geopar@gvtc.com
210 748 4693[/QUOTE]
Hello George
Can you let me know on the exhaust manifold and the carb. Still waiting for your reply. Send me an email if you can.
I am looking for 3932461 small block exhaust manifold dated A to E
Also is the door panels original. Looking for Black door panels for a 70
Do you want to sell the 70 LT1 carb?? 400.00 shipped?
I emailed and left you several messages, but not heard back from you.
Let me know and I will try to lighten your collection of parts.
Grant