dshawster

I'm not sure what to call it but it is located in the engine compartment on the passenger side underneath the evap/heat box and attaches with 2 bolts to the fender and another 2 bolts on the frame. It appears to deflect air out through the side louvers. I have the drivers side but I am missing the passengers. Tried getting some good pictures with no success so I hope the description nails it.

grantstigers

Made of plastic and has a part number
confirm and I will see what I have.
I have some originals
Thanks, Grant
email me grantwong@telus.net

dshawster

The drivers side is metal, somewhat triangular in size with rubber stapled along one edge. No PN visible anywhere.

grantstigers

That is the inner splash shield
You can buy from vendors, but I think originals were a little thicker but it doesn't come with the rubber and needs to be stapled on
g

AllC34Me

Splash shields are available from most of the suppliers. If you look at the Paragon Web site they have an interactive catalogue. Check page 149 and you can confirm this is what you are looking for, and their pricing. Prices vary a lot between the suppliers because some have lower prices and higher shipping costs, some higher prices and lower shipping costs. Have to do your homework.

Paragon splash shields are part numbers 7168 and 7170 and their rubber seal kit is part number 4323K. Front out splash shields cost $20 each, the seal kit costs $10.

Good starting point for comparison.

Good luck with your search.

David Howard
AllC34Me