CA: Anyone have a nice 454 block or?
#1
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
CA: Anyone have a nice 454 block or?
Feelers out no rush
427 is what I really want. My last one was stolen yrs ago they are simply WAY too much $.
Was hoping I could come across a nice 454 (4bolt a +) or even a 502 I could slowly piece together then sell my 383. Its pretty stout but miss the brute thunder of the BBC.
If you have something clean and reasonable give price shipped to 91354
I am 10 min from Magic Mountain Ca.
If its a rare #s match deal Im not the guy shallow pockets here. Going in a 67 A body
Sold my std bore 396 for 100 couldnt give it away
Steel crank a + not necessary though cast wont hold up to what I want to do
Thanks all.
If you have other sbc bbc bbf bbm cores that youd sell for core price interested also. Alum heads, intakes holley carbs etc.
427 is what I really want. My last one was stolen yrs ago they are simply WAY too much $.
Was hoping I could come across a nice 454 (4bolt a +) or even a 502 I could slowly piece together then sell my 383. Its pretty stout but miss the brute thunder of the BBC.
If you have something clean and reasonable give price shipped to 91354
I am 10 min from Magic Mountain Ca.
If its a rare #s match deal Im not the guy shallow pockets here. Going in a 67 A body
Sold my std bore 396 for 100 couldnt give it away
Steel crank a + not necessary though cast wont hold up to what I want to do
Thanks all.
If you have other sbc bbc bbf bbm cores that youd sell for core price interested also. Alum heads, intakes holley carbs etc.
Last edited by cv67; 01-02-2017 at 12:45 PM.
#2
Melting Slicks
I have a nice bare block 454 with caps, 4 bolt mains, also have a 427 steel
crank cut 10-10,
crank cut 10-10,
#3
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Price?
#4
Melting Slicks
price on the block would be 350 and the crank is 150
#s on the block are 3999289 date F-14-73
#s on the block are 3999289 date F-14-73
Last edited by LT-1 kid; 01-04-2017 at 09:42 AM.
#5
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Doesnt sound bad std bore?
Wondering if frieght cost would make it prohibitive for me?
Im open......
Im in Valencia Ca 91354 maybe something could be worked out? thats the block Im looking for. Dates dont matter just size and stuck on a 4 bolt. Heard a 2 would hold but Im OCD
Love to spend no more than $500 not sure if frieght would kill it though
Id probably use a Scat but would be nice to have a steel crank around in case.
See if something can be worked out Ill ck on freight unless you know someone
Wondering if frieght cost would make it prohibitive for me?
Im open......
Im in Valencia Ca 91354 maybe something could be worked out? thats the block Im looking for. Dates dont matter just size and stuck on a 4 bolt. Heard a 2 would hold but Im OCD
Love to spend no more than $500 not sure if frieght would kill it though
Id probably use a Scat but would be nice to have a steel crank around in case.
See if something can be worked out Ill ck on freight unless you know someone
Last edited by cv67; 01-03-2017 at 09:05 PM.
#6
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
LT1 still waiting on my source for a freight price hope this can get worked out. Thanks for the call
#7
Drifting
have a 454
2 bolt...oval port with 2.19. intake and 1.88 ext, all new valve springs..etc...steel 427 crank ..real corvette holly intake.. 4000 miles on motor..total master rebuild kit...Holley 800 double pumper...stock exhaust manifolds..
I used the fly wheel and starter on my other motor for my 67 ..but complete other than starer and fly wheel
bluzrocker@att.net ...northern calif.
I could meet you 1/2 way on delivery
I used the fly wheel and starter on my other motor for my 67 ..but complete other than starer and fly wheel
bluzrocker@att.net ...northern calif.
I could meet you 1/2 way on delivery
Feelers out no rush
427 is what I really want. My last one was stolen yrs ago they are simply WAY too much $.
Was hoping I could come across a nice 454 (4bolt a +) or even a 502 I could slowly piece together then sell my 383. Its pretty stout but miss the brute thunder of the BBC.
If you have something clean and reasonable give price shipped to 91354
I am 10 min from Magic Mountain Ca.
If its a rare #s match deal Im not the guy shallow pockets here. Going in a 67 A body
Sold my std bore 396 for 100 couldnt give it away
Steel crank a + not necessary though cast wont hold up to what I want to do
Thanks all.
If you have other sbc bbc bbf bbm cores that youd sell for core price interested also. Alum heads, intakes holley carbs etc.
427 is what I really want. My last one was stolen yrs ago they are simply WAY too much $.
Was hoping I could come across a nice 454 (4bolt a +) or even a 502 I could slowly piece together then sell my 383. Its pretty stout but miss the brute thunder of the BBC.
If you have something clean and reasonable give price shipped to 91354
I am 10 min from Magic Mountain Ca.
If its a rare #s match deal Im not the guy shallow pockets here. Going in a 67 A body
Sold my std bore 396 for 100 couldnt give it away
Steel crank a + not necessary though cast wont hold up to what I want to do
Thanks all.
If you have other sbc bbc bbf bbm cores that youd sell for core price interested also. Alum heads, intakes holley carbs etc.
Last edited by bluzrocker; 01-05-2017 at 08:30 PM. Reason: add info
#8
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
send me an email at port4hp@live.com
im open to 2bolt too at right delivered price
sorry I only pay core price but will go all day long at that
LT1 kid please contact me thats for my personal ride.
im open to 2bolt too at right delivered price
sorry I only pay core price but will go all day long at that
LT1 kid please contact me thats for my personal ride.
#10
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Thanks will search it
bluz what are you asking
Looking for core price stuff but you never know
Need an excuse to sell this 383 miss the BB torque.
bluz what are you asking
Looking for core price stuff but you never know
Need an excuse to sell this 383 miss the BB torque.
#11
Melting Slicks
I am still waiting on a shipping quote, will know by mon
#12
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Same here talk soon
#13
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
To reiterate
I wil pay CORE price ( not dream price) for 454 502 427 350 396 427etc
only int in bare blocls 4 bolts a plus steel cranks a a plus bt plan on chp scat
if youre good with that contact me
hate to say I dont g.a.s .about numbs matching rare etc just price/ci
FWIW I got 100 for my last #s 396 amd 1972 400 std bore perfect 400 ci magged sux SLM know. BUT-
If youre looking for top buck pleas try ebay
4 bolts a + but not necessary
At least im honest and up front
Be honest with me get the same in return Please dont feed me a line of chit I know better.
Keep it in persective thanks.
Single plance, alum intakes considered
it is what it is.
91354 area code.
I wil pay CORE price ( not dream price) for 454 502 427 350 396 427etc
only int in bare blocls 4 bolts a plus steel cranks a a plus bt plan on chp scat
if youre good with that contact me
hate to say I dont g.a.s .about numbs matching rare etc just price/ci
FWIW I got 100 for my last #s 396 amd 1972 400 std bore perfect 400 ci magged sux SLM know. BUT-
If youre looking for top buck pleas try ebay
4 bolts a + but not necessary
At least im honest and up front
Be honest with me get the same in return Please dont feed me a line of chit I know better.
Keep it in persective thanks.
Single plance, alum intakes considered
it is what it is.
91354 area code.
Last edited by cv67; 01-08-2017 at 10:26 PM.
#14
Team Owner
ive got 2 ,468[454+30] complete engines ,just rebuilt and 1-2hours dyno time,,4-bolt mains,7/16 hd rods,forged pistons [9.5 to 1],cast iron heads,new aluminum intakes,850 holley carbs,6qt oil pans,hv oil pumps,hyd roller cams,roller rockers,,
made 582hp on pump gas
$7,200 each is what I have in them
made 582hp on pump gas
$7,200 each is what I have in them
#15
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Pricee bare block (no offemse don;y llke iron heads)
dmaxx pm me let me know what you have
port4ph@live.com
dmaxx pm me let me know what you have
port4ph@live.com
Last edited by cv67; 01-09-2017 at 12:30 AM.
#16
Melting Slicks
I have a rough price on shipping, about 200 give or take a little
#17
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Thats pretty good
Im going to be off the forum for awhile please email/phone thanks
Still interested
Im going to be off the forum for awhile please email/phone thanks
Still interested
#19
Team Owner
Thread Starter
Member Since: Oct 2004
Location: altered state
Posts: 81,242
Received 3,043 Likes
on
2,602 Posts
St. Jude Donor '05
Thanks, way out of the ol budget
Big dreams shallow pockets the usual
LT1 kid been in the hospital for a few days wasnt avoiding you couldnt get a quote. using your guys fine if we can make a deal lets do it
Was going to search for a 502 and go 540+ but hava a feeling I wont be getting a block for a few hundred.
Think a stout 454 or 496 will be more than enough.
only have a 275/50/15 cant go any bigger w/o tubbing which wont happen
To anyone else that responded I may have not gotten back to been out of service thats all. If I offended anyone with a response wasnt intended to be.
Big dreams shallow pockets the usual
LT1 kid been in the hospital for a few days wasnt avoiding you couldnt get a quote. using your guys fine if we can make a deal lets do it
Was going to search for a 502 and go 540+ but hava a feeling I wont be getting a block for a few hundred.
Think a stout 454 or 496 will be more than enough.
only have a 275/50/15 cant go any bigger w/o tubbing which wont happen
To anyone else that responded I may have not gotten back to been out of service thats all. If I offended anyone with a response wasnt intended to be.