WTB: WTB Offset Trailing Arm Assemblies
#2
BubbaHut
VanSteel Offset arms
I have a brand new pair of completely loaded arms from Van Steel.
They are complete with all new bearings & spindles. They also have Johnny Joints and are built to except coil overs as well. HD wheel studs as well.
I had these built up as spares for my car
$ 2,000 plus the ride
They are complete with all new bearings & spindles. They also have Johnny Joints and are built to except coil overs as well. HD wheel studs as well.
I had these built up as spares for my car
$ 2,000 plus the ride
#3
Race Director
Thread Starter
I have a brand new pair of completely loaded arms from Van Steel.
They are complete with all new bearings & spindles. They also have Johnny Joints and are built to except coil overs as well. HD wheel studs as well.
I had these built up as spares for my car
$ 2,000 plus the ride
They are complete with all new bearings & spindles. They also have Johnny Joints and are built to except coil overs as well. HD wheel studs as well.
I had these built up as spares for my car
$ 2,000 plus the ride
Van Steel rebuilds them and makes them from your old ones for $1000...
65-82 Offset T-Arms
Powder Coated Offsets T-Arm With Poly Bushings
New Rotor & Shoes
New Cable Guide, Lock Washers & Nuts
New Bearings, Seals and Races
New Stainless Steel Parking Brake Mechanism
New Parking Brake Shoes
Lifetime Warrany, Unlimited Mileage
Offsets are ¼” Thick, C-Channel, Laser Cut & Jig Welded
**NOTE** This price is to rebuild your units. NOT exchange unit. Your parts must be sent in first.
Price: $1,156.99 pair
So, no.. $2500 is to even in the ball park....
But thank you.
p
And cuter research shows BRAND NEW ONEs for $2000....lol
New Complete Offset Johnny Joint Trailing Arms w/Rotors
New Offset T-Arms w/Johnny Joints
New Rotors
New Spindles
New Caliper Mounting Brackets
New Bearing Supports
New Backing Plates
New SS Parking Brake Hardware
New Parking Brake Shoes
New Bearings, Seals & Races
Lifetime, Unlimited Mileage Warranty
Price: $2,049.99 pair
I will give you $1000 for them, that is all they are worth.
Last edited by pauldana; 02-15-2018 at 04:11 PM.
#4
BubbaHut
homework
Hey Pal,
For a guy that has a lot of posts ?
Oh well, These arms are 800 ea at vanteels bare .( TA-06CK ) check the site
That is 2 X 800 = 1600 + +
Plus all the fully loaded goodies, spindles, bearings ,back plates , brakes etc.....blah blah blah
You need to put in a little more homework before you ...
oh well
no need to answer, I am not interested in helping you
regards
http://www.vansteel.com/index.cfm?fu...SABEgKrPPD_BwE
Van Steel rebuilds them and makes them from your old ones for $1000...
65-82 Offset T-Arms
Powder Coated Offsets T-Arm With Poly Bushings
New Rotor & Shoes
New Cable Guide, Lock Washers & Nuts
New Bearings, Seals and Races
New Stainless Steel Parking Brake Mechanism
New Parking Brake Shoes
Lifetime Warrany, Unlimited Mileage
Offsets are ¼” Thick, C-Channel, Laser Cut & Jig Welded
**NOTE** This price is to rebuild your units. NOT exchange unit. Your parts must be sent in first.
Price: $1,156.99 pair
So, no.. $2500 is to even in the ball park....
But thank you.
p
And cuter research shows BRAND NEW ONEs for $2000....lol
New Complete Offset Johnny Joint Trailing Arms w/Rotors
New Offset T-Arms w/Johnny Joints
New Rotors
New Spindles
New Caliper Mounting Brackets
New Bearing Supports
New Backing Plates
New SS Parking Brake Hardware
New Parking Brake Shoes
New Bearings, Seals & Races
Lifetime, Unlimited Mileage Warranty
Price: $2,049.99 pair
I will give you $1000 for them, that is all they are worth.[/QUOTE]
For a guy that has a lot of posts ?
Oh well, These arms are 800 ea at vanteels bare .( TA-06CK ) check the site
That is 2 X 800 = 1600 + +
Plus all the fully loaded goodies, spindles, bearings ,back plates , brakes etc.....blah blah blah
You need to put in a little more homework before you ...
oh well
no need to answer, I am not interested in helping you
regards
http://www.vansteel.com/index.cfm?fu...SABEgKrPPD_BwE
Van Steel rebuilds them and makes them from your old ones for $1000...
65-82 Offset T-Arms
Powder Coated Offsets T-Arm With Poly Bushings
New Rotor & Shoes
New Cable Guide, Lock Washers & Nuts
New Bearings, Seals and Races
New Stainless Steel Parking Brake Mechanism
New Parking Brake Shoes
Lifetime Warrany, Unlimited Mileage
Offsets are ¼” Thick, C-Channel, Laser Cut & Jig Welded
**NOTE** This price is to rebuild your units. NOT exchange unit. Your parts must be sent in first.
Price: $1,156.99 pair
So, no.. $2500 is to even in the ball park....
But thank you.
p
And cuter research shows BRAND NEW ONEs for $2000....lol
New Complete Offset Johnny Joint Trailing Arms w/Rotors
New Offset T-Arms w/Johnny Joints
New Rotors
New Spindles
New Caliper Mounting Brackets
New Bearing Supports
New Backing Plates
New SS Parking Brake Hardware
New Parking Brake Shoes
New Bearings, Seals & Races
Lifetime, Unlimited Mileage Warranty
Price: $2,049.99 pair
I will give you $1000 for them, that is all they are worth.[/QUOTE]
#5
Race Director
Thread Starter
Hey Pal,
For a guy that has a lot of posts ?
Oh well, These arms are 800 ea at vanteels bare .( TA-06CK ) check the site
That is 2 X 800 = 1600 + +
Plus all the fully loaded goodies, spindles, bearings ,back plates , brakes etc.....blah blah blah
You need to put in a little more homework before you ...
oh well
no need to answer, I am not interested in helping you
regards
http://www.vansteel.com/index.cfm?fu...SABEgKrPPD_BwE
Van Steel rebuilds them and makes them from your old ones for $1000...
65-82 Offset T-Arms
Powder Coated Offsets T-Arm With Poly Bushings
New Rotor & Shoes
New Cable Guide, Lock Washers & Nuts
New Bearings, Seals and Races
New Stainless Steel Parking Brake Mechanism
New Parking Brake Shoes
Lifetime Warrany, Unlimited Mileage
Offsets are ¼” Thick, C-Channel, Laser Cut & Jig Welded
**NOTE** This price is to rebuild your units. NOT exchange unit. Your parts must be sent in first.
Price: $1,156.99 pair
So, no.. $2500 is to even in the ball park....
But thank you.
p
And cuter research shows BRAND NEW ONEs for $2000....lol
New Complete Offset Johnny Joint Trailing Arms w/Rotors
New Offset T-Arms w/Johnny Joints
New Rotors
New Spindles
New Caliper Mounting Brackets
New Bearing Supports
New Backing Plates
New SS Parking Brake Hardware
New Parking Brake Shoes
New Bearings, Seals & Races
Lifetime, Unlimited Mileage Warranty
Price: $2,049.99 pair
I will give you $1000 for them, that is all they are worth.
For a guy that has a lot of posts ?
Oh well, These arms are 800 ea at vanteels bare .( TA-06CK ) check the site
That is 2 X 800 = 1600 + +
Plus all the fully loaded goodies, spindles, bearings ,back plates , brakes etc.....blah blah blah
You need to put in a little more homework before you ...
oh well
no need to answer, I am not interested in helping you
regards
http://www.vansteel.com/index.cfm?fu...SABEgKrPPD_BwE
Van Steel rebuilds them and makes them from your old ones for $1000...
65-82 Offset T-Arms
Powder Coated Offsets T-Arm With Poly Bushings
New Rotor & Shoes
New Cable Guide, Lock Washers & Nuts
New Bearings, Seals and Races
New Stainless Steel Parking Brake Mechanism
New Parking Brake Shoes
Lifetime Warrany, Unlimited Mileage
Offsets are ¼” Thick, C-Channel, Laser Cut & Jig Welded
**NOTE** This price is to rebuild your units. NOT exchange unit. Your parts must be sent in first.
Price: $1,156.99 pair
So, no.. $2500 is to even in the ball park....
But thank you.
p
And cuter research shows BRAND NEW ONEs for $2000....lol
New Complete Offset Johnny Joint Trailing Arms w/Rotors
New Offset T-Arms w/Johnny Joints
New Rotors
New Spindles
New Caliper Mounting Brackets
New Bearing Supports
New Backing Plates
New SS Parking Brake Hardware
New Parking Brake Shoes
New Bearings, Seals & Races
Lifetime, Unlimited Mileage Warranty
Price: $2,049.99 pair
I will give you $1000 for them, that is all they are worth.
I did my home work:-) lol... look above, cut and past with web address..
I think you need to do a little home work.. NEW FULLY LOADES $2,050 PAIR... send in your old one and have them done and fully loaded $1160 PAIR
yours NOS $2500 lol... come on... be serious.
Last edited by pauldana; 02-15-2018 at 04:37 PM.
#6
Race Director
Thread Starter
Just got off the phone with van-steel...
to rebuild my trailing arm with 2" offset with jonny joints ... $1135.00 pair
anyone have a better deal for me? :-)
to rebuild my trailing arm with 2" offset with jonny joints ... $1135.00 pair
anyone have a better deal for me? :-)
Last edited by pauldana; 02-16-2018 at 01:11 PM.
#8
Race Director
Thread Starter
Anyway... I do not need rotors as I use 14” rotors/hats
No need for parking brake crap..leave that gutted..
And I already have the 30splin spendals....
#9
Melting Slicks
I have a set of offset trailing arms, brand new. I believe they are from VBP. Also have the adjustable strut rod settup. This is all brand new stuff, never used. I have changed directions and will not be using this stuff. How about $450 for everything plus shipping from 85259?
#12
Race Director
Thread Starter
I have a set of offset trailing arms, brand new. I believe they are from VBP. Also have the adjustable strut rod settup. This is all brand new stuff, never used. I have changed directions and will not be using this stuff. How about $450 for everything plus shipping from 85259?
Also they have 2 different offset TA’s available ... do you know which one it is? Part number by chance? If it is the JJ and 2” offset you have a deal:-)
P
#13
Race Director
Thread Starter
Having problems with the 5-6-7’s in the corners.. even track slicks do not give enough traction in the rear on a 10” rim... I can stuff a 12” under it after this
Last edited by pauldana; 03-22-2018 at 02:01 PM.
#14
Melting Slicks
Here are some pics, I can't find any numbers and I have no idea what a Jonny joint is.
#16
Melting Slicks
#17
Race Director
Thread Starter
Yes it is a very good deal, and if it had the jonny joints for even $75-100 more I would take him up on em... but I am going to hold out for the Jonny Joints... anyone else looking for this though.. yea, great deal:-)!
#18
Race Director
I thought the offset trailing arms were not needed anymore with the ability to put 18-19 in. wheels on.
The interference point with the bigger wheels is past the 2 in. offset and pretty much the same point on the trailing arm as the OEM trailing arm.
Sure when everyone was running 15 in. wheels the offset trailing arms were useful in getting a bigger tire under your car, however I managed to put a 295/50/15 tire on the stock trailing arms years ago.
It always came down to how close you come to the frame and the frame is something you don't want cut and weld for clearance.
The interference point with the bigger wheels is past the 2 in. offset and pretty much the same point on the trailing arm as the OEM trailing arm.
Sure when everyone was running 15 in. wheels the offset trailing arms were useful in getting a bigger tire under your car, however I managed to put a 295/50/15 tire on the stock trailing arms years ago.
It always came down to how close you come to the frame and the frame is something you don't want cut and weld for clearance.