FS: 1969 Corvette Project Car and Parts
#1
1969 Corvette Project Car and Parts
Chassis and Interior are not being parted out - Selling only as a rolling chassis,
Separately available parts are listed below the dashed line.
*Updated 1-31-2020*
For sale is my 1969 corvette that has been partially disassembled, but I have all the parts in tubs. Driver door is crack, started modifying the firewall for smoothing and removal of the wiper door actuator, started stripping paint with razor
*Location: South Mississippi
1. - 69 corvette Project car: 5000
chassis
vbp stage 2 performance suspension kit
composite rear spring
front springs
large front sway bar
rear sway bar
bilstien shocks
upgraded camber bars
solid diff cross member mounts
recently replace gas tank and sender
trailing arms rebuilt by corvette specialist in texas
completely rebuild front suspension
all chassis components possible were powdercoated black
rear diff cover powdercoated
recently replaced calipers, pads, and rotors
electric headlight conversion, 1 mostly complete, 1 still needs to be converted, have all hardware and electronics
Led Taillights
aftermarket radiator and fan (radiator needs to be replace)
Interior
rebuilt steering column, tilt, telescoping
set of stock seats(not in good shape)
Autometer center gauges
New lower LH Dash Pad
replaced dash pad
new weather seal kit
electric windows
electric locks
car was complete when started teardown, full interior, etc
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Separate parts also available not included with rolling chassis
*set of corbou seats and mounts 850 ****Updated****
hooker stainless steel side pipes for sbc with inserts 750
t56 magnum 2200
steel bell housing for sbc and t56 400
dual clutch kit with flywheel 800
hydraulic throwout bearing 250
Boyd Coddington wheels 1000
Custom Image Corvette 4" wide body front and rear quarters and front spoiler 1000
borgeson power steering conversion 500
406 sbc, full forge, roller cam, 1500 hp rotating assembly, lite weight crank, fully arp studded 10.5:1, Track 1 heads, brodix intake, serpentine kit with polished alt, pw pump, wp and pullies, gear cam drive: 7500
PSC Steering Reservoir 8.25 Remote Reservoir w/Clamp - 150
PSC sp1200x power steering pump - 185
I will be updating with pictures and more details as i inventory all other items
Separately available parts are listed below the dashed line.
*Updated 1-31-2020*
For sale is my 1969 corvette that has been partially disassembled, but I have all the parts in tubs. Driver door is crack, started modifying the firewall for smoothing and removal of the wiper door actuator, started stripping paint with razor
*Location: South Mississippi
1. - 69 corvette Project car: 5000
chassis
vbp stage 2 performance suspension kit
composite rear spring
front springs
large front sway bar
rear sway bar
bilstien shocks
upgraded camber bars
solid diff cross member mounts
recently replace gas tank and sender
trailing arms rebuilt by corvette specialist in texas
completely rebuild front suspension
all chassis components possible were powdercoated black
rear diff cover powdercoated
recently replaced calipers, pads, and rotors
electric headlight conversion, 1 mostly complete, 1 still needs to be converted, have all hardware and electronics
Led Taillights
aftermarket radiator and fan (radiator needs to be replace)
Interior
rebuilt steering column, tilt, telescoping
set of stock seats(not in good shape)
Autometer center gauges
New lower LH Dash Pad
replaced dash pad
new weather seal kit
electric windows
electric locks
car was complete when started teardown, full interior, etc
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Separate parts also available not included with rolling chassis
*set of corbou seats and mounts 850 ****Updated****
hooker stainless steel side pipes for sbc with inserts 750
t56 magnum 2200
steel bell housing for sbc and t56 400
dual clutch kit with flywheel 800
hydraulic throwout bearing 250
Boyd Coddington wheels 1000
Custom Image Corvette 4" wide body front and rear quarters and front spoiler 1000
borgeson power steering conversion 500
406 sbc, full forge, roller cam, 1500 hp rotating assembly, lite weight crank, fully arp studded 10.5:1, Track 1 heads, brodix intake, serpentine kit with polished alt, pw pump, wp and pullies, gear cam drive: 7500
PSC Steering Reservoir 8.25 Remote Reservoir w/Clamp - 150
PSC sp1200x power steering pump - 185
I will be updating with pictures and more details as i inventory all other items
Last edited by clifs-lmr800; 01-31-2020 at 10:26 PM. Reason: Corbeau Seats are not included in the rolling chassis and added location
#6
in south Mississippi
#8
#12
Safety Car
Member Since: Sep 2011
Location: Madeira Beach, FL
Posts: 3,600
Received 815 Likes
on
458 Posts
2023 C2 of the Year Finalist - Unmodified
2020 C3 of the Year Finalist - Unmodified
If the interior is black and the dash pad is perfect, I would like a price as I am interested.
Thank you,
Marshal
Thank you,
Marshal
#13
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Interested in where this one goes next.
Good luck with your sales.
David
#14
Coupe
Thanks but I am not parting out at this time, selling only as a roling chassis with all interior and components listed.
#18
Administrator
Member Since: Jul 2000
Location: About 1100 miles from where I call home. Blue lives matter.
Posts: 51,509
Received 5,364 Likes
on
2,788 Posts
Thanks but I am not parting out at this time, selling only as a roling chassis with all interior and components listed.
Guys, the OP has stated 3 times that the car and components are not being separated. Continuing to ask over and over about unlisted, unpriced parts will get this guy’s thread closed. Please follow his instruction.
If you have inquiries other than what he has offered here, send him a PM please. Thanks.
Last edited by vettebuyer6369; 11-21-2019 at 11:23 AM.
#19
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
The minute people see "parting out" it becomes a feeding frenzy.
Good luck to the OP on the post.
Pictures would make all the difference in folks understanding, in my opinion, what you are selling and what you are not selling.
Best of success.
David Howard
AllVettes4Me
Good luck to the OP on the post.
Pictures would make all the difference in folks understanding, in my opinion, what you are selling and what you are not selling.
Best of success.
David Howard
AllVettes4Me
The following users liked this post:
bmans vette (11-21-2019)
#20
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,575
Received 6,438 Likes
on
3,986 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
You listed a hydraulic throw out bearing, What comes with that? Does it have the master or what did you use?