When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Removing the bubba after market gauge from my 68 I’ve located the mounting box and gauges would like to find the correct connectors for the gauge does any one have a trash wire harness 68-72 that they want to part with or any of the pig tails connectors not
spending 400 for a new harness
Last edited by Redrocketremembered; 06-19-2022 at 10:43 PM.
Reason: Grammar police
I love this group Frances thanks you. I will post some before / after and some progress picture tonight. And share some in site as I go . And of course ask for help as bubba comes up .
here you go , its been sitting on a self for along time , if i remember right its for 71 and down , i seen the fusebox has a crack in it $75 plus shipping
, if this wont work may KS69COUPE can help you out!
here you go , its been sitting on a self for along time , if i remember right its for 71 and down , i seen the fusebox has a crack in it $75 plus shipping
, if this wont work may KS69COUPE can help you out!
gonna make this work when I’m done I’ll donate what’s left
some before and where I am . Not in order sorry all the bubba is
Out Would I be concerned with the burnt spots?
If the poster did indeed receive the wiring harness he needed and is happy with it, need a interior harness for my 1971. Someone swapped in a 1980 interior, including the wiring harness and steering column, and I'm in the process of pulling it all out! Please let me know if there are any left!
If the poster did indeed receive the wiring harness he needed and is happy with it, need a interior harness for my 1971. Someone swapped in a 1980 interior, including the wiring harness and steering column, and I'm in the process of pulling it all out! Please let me know if there are any left!
I have not received it yet from what I can tell I m going to take the pig tails back to the bundle for the gauges and the fiber optic parts for the front and two lower interior lights but what every is left I ll share
I have not received it yet from what I can tell I m going to take the pig tails back to the bundle for the gauges and the fiber optic parts for the front and two lower interior lights but what every is left I ll share
Thanks for offering to share! May need some of that wiring from you! I'm not sure the cross compatibility between the harnesses until I dive in. I was even considering retrofitting LED's into my dash as well. What kind of aftermarket gauges are you pulling out?
Thanks for offering to share! May need some of that wiring from you! I'm not sure the cross compatibility between the harnesses until I dive in. I was even considering retrofitting LED's into my dash as well. What kind of aftermarket gauges are you pulling out?
old 80s bubba rigged temp gauge was working clock ran but lost time oil worked fuel bounced but that may be the sender it floated with gas and brake amp no good hoping that where I’m losing charge to battery. I found new reproduction gm gauges for 200 clock for 153 . Considing sending the original gauges that came with the bezel and housing I found to have them restored 160 ea. 8-10 weeks . Not sure it worth 800.00 I going to be in this dash 1100.00 with new gauges including restored tach and speedo bezel parts and blue tooth radio light switch .but it will be as close to right as I can . I m hoping to wrap the center dash up Sunday if every gets here than next week will be light switch and speedo and tach. What ever is left I Offer up
old 80s bubba rigged temp gauge was working clock ran but lost time oil worked fuel bounced but that may be the sender it floated with gas and brake amp no good hoping that where I’m losing charge to battery. I found new reproduction gm gauges for 200 clock for 153 . Considing sending the original gauges that came with the bezel and housing I found to have them restored 160 ea. 8-10 weeks . Not sure it worth 800.00 I going to be in this dash 1100.00 with new gauges including restored tach and speedo bezel parts and blue tooth radio light switch .but it will be as close to right as I can . I m hoping to wrap the center dash up Sunday if every gets here than next week will be light switch and speedo and tach. What ever is left I Offer up
Oh man I know the feeling of the budget exploding! Previous owner retromodded my '71 LT-1 in the 80's and swapped in a 1980 interior! I definitely underestimated the cost of putting a '71 interior in! I'm doing oringinal looking/slightly retromodded with after market gauges in my cluster. I do have a set of crap OEM gauges in an extra cluster, if you need any oddball parts off of I can pull, just let me know.
gonna make this work when I’m done I’ll donate what’s left
some before and where I am . Not in order sorry all the bubba is
Out Would I be concerned with the burnt spots?
today hopefully the final piece to the puzzle arrived thanks bill I was dead tired when I got home from but this motivated me. Here is today progress one brown one orange and one yellow to figuare out. So I guess I owe Wilcox a thank you too also
Will be behind speedometer and tack next week end so what left is up for grab
Last edited by Redrocketremembered; 06-24-2022 at 11:26 PM.
Reason: Adding photo
06-19-2022, 10:42 PM
Center console gauge pig tails
