When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Excellent unrestored 67 through 69 Corvette tripower ignition coil mounting bracket. With correct notch cut out for tripower intake. Included are correct bolts for the 67 with a flange style or the correct bolts for 68 and 69 with the captured star washer. Excellent! Unrestored condition still retains most of its plating along with the hardware. $60 3248 #drivetrain
Absolutely perfectly restored 68 through 73 Corvette rear bumper bolt mounting kit. Included are four large CH head marking mounting bolts with eight serrated washers and nuts that attach the brackets to the frame. Also included are 10 smaller ch head marking mounting bolts that attach the brackets and four a head marking bolts that attach the bumpers to the body. You will not find a nicer kit. $350 3247 #body
WITTEK 1-1/4 DCM Gold smog pump has clamps. EXCELLENT ORIGINAL UNRESTORED CONDITION.
Used on all 66-74 A.I.R. Systems still retain 99% of their original plating. You can still see the off color gold plating on them. Won't find nicer unrestored.
$40 ea 3246 #drivetrain
WITTEK 1-1/4 DCM Gold smog pump has clamps. EXCELLENT ORIGINAL UNRESTORED CONDITION.
Used on all 66-74 A.I.R. Systems still retain 99% of their original plating. You can still see the off color gold plating on them. Won't find nicer unrestored.
$40 ea 3246 #drivetrain
Hi Rich
Are these dated? If so, what would the date be?
thank you
Hi Rich
Are these dated? If so, what would the date be?
thank you
Joe, the nice thing about these clamps is they are not dated so they are correct and will judge correctly with zero deductions in points for originality for any year from 66 through mid-70s. They're stamped wittek DCM 1 1/4 Again, like I said in both NCRS and Bloomington there will be zero deduction in points because these clamps were used from 66 all the way up until the mid-70s with no dates.
Excellent original 66-67-68 Corvette Camaro Chevelle Nova 837 horn relay with all correct assembly line installed mounting hardware. 837 $60 3278 #underhood. **SOLD**
Last edited by Original GM Hardware; 06-24-2023 at 06:38 PM.
One single NOS. 63-68 Corvette inner seat Belt mounting bolt with correct cutout in thread and nylon insert and d stamping on the bottom. Excellent original plating. $40 3280 #interior
Excellent original unrestored Corvette Camaro Chevelle Nova Holly carburetor to intake manifold mounting studs complete set of four with dimples. Original unrestored nuts also included. $80 3281 #drivetrain
Excellent. Restored original Corvette Camaro Chevelle Nova quadrajet mounting hardware. Included are 2 A head marking, mounting bolts, 2 dimpled studs and 2 nuts. These are 100% original pieces that have been restored and replated and are ready for installation. They do not reproduce these properly.$603282 #drivetrain
Exceptionally nice original restored 69-72 Corvette front and rear sway bar bushing retainer to frame mounting bolts. Elh head marking. They have been stripped, tapped and replated with a fresh coat of oil on them. As nice as you will find. Several sets available. $60 a set of four. 3292 #chassis
Perfectly restored. Original 68-72 Corvette front spoiler, rear valance, female hood catch and hood cable to hood mounting kits. As nice as you'll find. All assembly line installed pieces that have been stripped, tapped and replated the correct finish. Finish. This kit contains L head marking bolts, C head marking bolts and SEMS head marking bolts. $100 3294 #body
Perfectly restored. Original 68-72 Corvette front spoiler, rear valance, female hood catch and hood cable to hood mounting kits. As nice as you'll find. All assembly line installed pieces that have been stripped, tapped and replated the correct finish. Finish. This kit contains RBW head marking bolts, A head marking bolts and EL head marking bolts. $100 3294 #body
Original survivor unrestored Corvette 63-72 single crimp power steering control valve to piston hoses replacements have double crimp on the end, this is a judged item. $80 3294 #chassis
Extremely nice original restored 68-69 Corvette rear bumper bracket to frame mounting bolts SB head marking with serrated washers and nuts. $80 3294 #chassis
Extremely nice. Original Assembly line installed, restored 68-74 Corvette front bumper brackets to frame mounting hardware. All WB head marking. Included are 8 bolts, 8 lock washers, 8 flat washers and four nuts. $100.3295 #chassis
Excellent original restored 65-74 396 427 454 big block Corvette rear axle caps and mounting bolts SB head marking. The reproduction caps do not fit properly and they do not reproduce the original SB head marking bolts. $80 two sets available. 3298 #drivetrain
NOS WITTEK 2-1/16 upper radiator hose clamps for Corvette Camaro Chevelle Nova one is undated. The other is dated 1/86. These are the original thick style clamps as the reproductions are thinner and do not tighten down properly. $100 3300 #drivetrain
Perfectly restored assembly line installed 63-82 Corvette front lower a-arm mounting kit. Included our [] head marking mounting bolts, four lock washers and two nut plates with N stamping.
$80 3301#chassis
06-24-2023, 12:52 PM
