Going To Dyno Tomorrow
Thread Starter
Melting Slicks
Joined: Apr 2002
Posts: 2,337
Likes: 14
From: Norfolk VA
Going To Dyno Tomorrow
Tomorrow morning I am going to have my vette dynoed for rwhp. ($75 for two pulls) With the set up I have I'm expecting about 200-220. I will be surprised if I get more than that. Will post results along with engine specs tomorrow afternoon.
Last edited by Oldguard 7; Feb 4, 2005 at 08:43 PM.
Race Director
Joined: Feb 1999
Posts: 19,659
Likes: 34
From: Lenoir City Tennessee
Ci 6, 8 & 10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
Do you get to run the car on the dyno or do they run the car. The one time I have had mine on the dyno I got to make the pulls. Best I could do out of mine was 252RWHP and 300RWTQ. I was ok with that.
Have fun and good luck with it.
Have fun and good luck with it.
Instructor
Joined: Jan 2005
Posts: 235
Likes: 1
From: West Seneca New York
I dyno'ed my car last Oct at C3X in B.G.
What a blast that was. The car was running really lean, but I managed 278 hp 309 ft.lb. at the rear wheels. Next year when the TPI system and the NOS is installed, I hope the numbers climb into the axle breaking range.
Darryl
What a blast that was. The car was running really lean, but I managed 278 hp 309 ft.lb. at the rear wheels. Next year when the TPI system and the NOS is installed, I hope the numbers climb into the axle breaking range.
Darryl
Race Director
Joined: Sep 2002
Posts: 10,362
Likes: 5
From: San Diego - Deep Within The State of CONFUSION!
Originally Posted by Sarge81
I dyno'ed my car last Oct at C3X in B.G.
What a blast that was. The car was running really lean, but I managed 278 hp 309 ft.lb. at the rear wheels. Next year when the TPI system and the NOS is installed, I hope the numbers climb into the axle breaking range.
Darryl
What a blast that was. The car was running really lean, but I managed 278 hp 309 ft.lb. at the rear wheels. Next year when the TPI system and the NOS is installed, I hope the numbers climb into the axle breaking range.
Darryl
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Instructor
Joined: Jan 2005
Posts: 235
Likes: 1
From: West Seneca New York
Originally Posted by SanDiegoPaul
My car runs at 340 foot pounds of torque, and 260 HP right up to 5,500. I'm looking forward to aluminum heads of one flavor or another it it's future.
Darryl