Finally got my intake swapped.
Thread Starter
Burning Brakes
Joined: Oct 2003
Posts: 1,097
Likes: 0
From: Olive Branch MS
St. Jude Contributor
Finally got my intake swapped.
This is what it looked like when I got the car
This is what it looks like now
Still not a super machine like some of ya'lls I've seen, but I'm getting there.
This is what it looks like now
Still not a super machine like some of ya'lls I've seen, but I'm getting there.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Burning Brakes
Joined: Oct 2003
Posts: 1,097
Likes: 0
From: Olive Branch MS
St. Jude Contributor
SanDiegoPaul,
The valve covers are stock L48's, painted black with Hi-temp engine enamel, then hi-temp clear coat. After that I sanded the fins for the L82 look.
Jeaux,
The breather is a 14" w/a 2" drop from Big B Auto. Found it on e-bay. Was about $22 to my door. It came with a 3" filter and I had to get a 2" to replace it. You can get it from them with the 2".
The valve covers are stock L48's, painted black with Hi-temp engine enamel, then hi-temp clear coat. After that I sanded the fins for the L82 look.
Jeaux,
The breather is a 14" w/a 2" drop from Big B Auto. Found it on e-bay. Was about $22 to my door. It came with a 3" filter and I had to get a 2" to replace it. You can get it from them with the 2".
