New "Quadra-Dominator"
Thread Starter
Melting Slicks
Joined: Dec 2001
Posts: 2,025
Likes: 1
From: Billings MT
New "Quadra-Dominator"
I am considering trying this new carb from Bill Mitchel and wanted to know if anyone had an opinions. Its basically a dominator set up to work on the street. The primaries only flow 395cfm, total cfm is 950. Hence the "Quadra-Dominator" title.. 
Thoughts?
Thoughts?
Le Mans Master
Joined: Dec 2003
Posts: 5,727
Likes: 38
From: Fremont CA
I have a Edelbrock C454 dual plane hi-rise and a 1050 cfm Holley Dominator from the early 70's that we pulled of a LS-6 Chevelle in about 1980 to get it to pass smog. The Holley is a List #9375 Carb that is still bring made but, my Holley has a choke housing and choke set-up. I have been told these carbs are rare and the fuel metering in them was for a "hot street" style BB Chevy (different spec the the current #9375 Dominators.) I have been thinking about selling my set-up if anyone wants to try it I send them photos of the pieces. The LS-6 Chevelle ran high 11s with this set-up and factory 4.10 gears in the back (M-22 car not automatic.)
