Looking for flow rate files for desktop dyno.
Thread Starter
Le Mans Master
Joined: May 2003
Posts: 5,642
Likes: 1
Looking for flow rate files for desktop dyno.
looking for files for the 1063 big block heads, trying to get an accurate idea of power so i can choose the correct cam for my 468
Also, not quite sure of all numbers
on cam so any advice with this proggy appreciated.
Also, not quite sure of all numbers
on cam so any advice with this proggy appreciated.
Last edited by munday; Jun 15, 2005 at 11:51 PM.
Race Director
Joined: Jun 2000
Posts: 10,046
Likes: 675
From: FL
Chevy High Performance has a lot of flow numbers on their site, you'll just have to type them in yourself and save them.
www.chevyhiperformance.com
Just do some digging there.
www.chevyhiperformance.com
Just do some digging there.
Drifting
Joined: Dec 1999
Posts: 1,462
Likes: 1
From: Reno nevada
To get 650 it requires @ these minimums.
Heads that flow over 340 cfm intake and 240 exhaust.
compression in the 10.5 -11.2 range with aluminum heads
Roller cam that is @ 255/260 in the mid to high .600 lifts
large tube headers and good three inch exhaust.
Heads that flow over 340 cfm intake and 240 exhaust.
compression in the 10.5 -11.2 range with aluminum heads
Roller cam that is @ 255/260 in the mid to high .600 lifts
large tube headers and good three inch exhaust.
