Will this GM Cam work w/ Vortecs?
Thread Starter
Drifting
Joined: Feb 2005
Posts: 1,583
Likes: 5
From: Richardson Tx.
Will this GM Cam work w/ Vortecs?
I am looking at the GM Cam that goes in the 330HP GM Crate Engine (I believe) - GM Part # 24502476 found here:
http://www.sdpc2000.com/catalog/989/...c-Camshaft.htm
I just wanted to make sure that it would work with the Vortec heads without any problems before I go ahead and purchase.
http://www.sdpc2000.com/catalog/989/...c-Camshaft.htm
I just wanted to make sure that it would work with the Vortec heads without any problems before I go ahead and purchase.
Race Director
Joined: Mar 2001
Posts: 11,322
Likes: 1
From: Living in the Hartland
Yes, they use vortec heads on the 330hp GM crate eng. Have seen some mag articles with varying max lift specs for Vortecs from .460 to .480, it might be a variance from production heads they put on vehicles compared to the ones they sell aftermarket.
Last edited by Fevre; Jul 21, 2005 at 10:24 AM.
Instructor
Joined: Jan 2005
Posts: 235
Likes: 1
From: West Seneca New York
330 hp cam
79vetter,
I have a 350/330 hp crate engine cam if your interested.
It has about 2000 miles on it. I changed over to the LT4 Hot Cam kit in mine. I also believe that I still have all the lifters (in order) in a box. I'll have to check.
PM or Email me if interested.
Darryl
I have a 350/330 hp crate engine cam if your interested.
It has about 2000 miles on it. I changed over to the LT4 Hot Cam kit in mine. I also believe that I still have all the lifters (in order) in a box. I'll have to check.
PM or Email me if interested.
Darryl
Drifting
Joined: Aug 2004
Posts: 1,677
Likes: 1
From: Potomac Falls VA
Originally Posted by Sarge81
79vetter,
I have a 350/330 hp crate engine cam if your interested.
It has about 2000 miles on it. I changed over to the LT4 Hot Cam kit in mine. I also believe that I still have all the lifters (in order) in a box. I'll have to check.
PM or Email me if interested.
Darryl
I have a 350/330 hp crate engine cam if your interested.
It has about 2000 miles on it. I changed over to the LT4 Hot Cam kit in mine. I also believe that I still have all the lifters (in order) in a box. I'll have to check.
PM or Email me if interested.
Darryl
