Lizard Skin Undercoating
Thread Starter
Instructor
Joined: Jan 2005
Posts: 174
Likes: 0
From: Tampa Bay Florida
Lizard Skin Undercoating
Anyone ever try this?
http://www.coollizard.com/
Here's a Custom Rodder article about it:
http://customrodderweb.com/tech/0507cr_spray/
http://www.coollizard.com/
Here's a Custom Rodder article about it:
http://customrodderweb.com/tech/0507cr_spray/
Thread Starter
Instructor
Joined: Jan 2005
Posts: 174
Likes: 0
From: Tampa Bay Florida
Originally Posted by BerniesVette
There was a post on this earlier. You might do a search on it. I can't remember what the comments were. Sorry I couldn't be more help.
Bernie
Bernie
http://forums.corvetteforum.com/show...kin&forum_id=3
I'm sure the stuff works great, but $400 is a bit expensive.
Plus, I haven't seen Chip Foose using this stuff. 
Think I'll use reflectex.
Last edited by cannonfl; Nov 18, 2005 at 12:37 PM.
Advanced
Joined: Jul 2004
Posts: 72
Likes: 0
From: Houston Texas
I used it. It really absorbs vibration. I can not rate its thermal performance because I did not drive my vette much before I restored it. But with the adition of a large exhaust system I thought it wise to do something to address the heat issue. Especially here in Houston during the summer. I did talk to the people who actually make the stuff here in Houston. I know the basic technology used for thermal properties was developed by NASA.
Applying the stuff.
http://www.davidpetryk.net/imagepages/image477.html
Applying the stuff.
http://www.davidpetryk.net/imagepages/image477.html
