I need a shorter rear composit spring
Thread Starter
Advanced
Joined: Sep 2005
Posts: 93
Likes: 0
I need a shorter rear composit spring
I have installed offset trailing arms and have 17X9.5 rear wheels, but the wheel is hitting the composit spring. I have heard of people getting shorter springs, but I dont know what to buy or from who.
Currently from end to end unsprung it measures 46"
end to end wraped around the curve it measures 48 3/4"
There are also the numbers 2978 and 325 on it.
What do the numbers mean?
Looking for help or advise on picking a new spring.
Currently from end to end unsprung it measures 46"
end to end wraped around the curve it measures 48 3/4"
There are also the numbers 2978 and 325 on it.
What do the numbers mean?
Looking for help or advise on picking a new spring.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski