ZF-6 install is a go!
Melting Slicks
Joined: Oct 2001
Posts: 2,320
Likes: 2
From: Salem Oregon
This is doing the swap to a older c4, which I am thinking of doing, real soon I hope. So alot of it won't apply to you, but you might find something useful in here. Good luck,,,Randy
http://hometown.aol.com/corvettez51r...age/index.html
http://hometown.aol.com/corvettez51r...age/index.html
Thread Starter
Race Director
Joined: Dec 1999
Posts: 16,945
Likes: 9
The only thing you can use from that article is the clutch setup, the stock pressure plate will work but the LT5 one will give you more pedal. Another solution is the tpis pivot ball but it's a pita to install, it's basically a milled down LT5 stud and because of the milling the hex shape is removed and you can't remove it from the outside but have to use a wrench on the inside. This can be a big PITA.
As for the rest, you'll need to fab a transmission mount and the tunnel needs to be widened.
As for the rest, you'll need to fab a transmission mount and the tunnel needs to be widened.
