Tie Rod ends..thread size
Cruising
Joined: Dec 2005
Posts: 11
Likes: 0
From: Mineville Nova Scotia
In answer to your question, the thread size is 5/8 fine thread. I have just finished making a set of stainless steel adjuster sleeves for my 77, and I think the same rod ends are used.
p/s rember only 2 are 5/8 right hand fine thread, the other 2 are 5/8 left hand fine thread
p/s rember only 2 are 5/8 right hand fine thread, the other 2 are 5/8 left hand fine thread
