Check out my new components (pics)!!!!
Thread Starter
Melting Slicks
Joined: Aug 2004
Posts: 2,165
Likes: 950
From: Keizer Oregon
Check out my new components (pics)!!!!
I just got the new cam and lifters set:
Comp Cams 286HR Hydraulic Roller retrofit kit.
lift=.560/.560 duration 230/230 @050
Heads just came back from a competetion port/polish/valve job/new springs job by Louthan Competetion Cylinder heads.....~$800
Going in my 383 and hoping to push 500hp
Comp Cams 286HR Hydraulic Roller retrofit kit.
lift=.560/.560 duration 230/230 @050
Heads just came back from a competetion port/polish/valve job/new springs job by Louthan Competetion Cylinder heads.....~$800
Going in my 383 and hoping to push 500hp
Safety Car
Joined: Dec 2005
Posts: 4,270
Likes: 20
From: Central Michigan
Christmas in the spring That's the same cam I'll be using in my 383, along with a set of Dart Iron Eagle 200cc heads. In fact, speaking of new parts, I just got my RPM air-gap today. The UPS guy noticed the Summit box, we get to talking, and I ended up taking the cover off the Vette and letting him drool for a bit before he had to go back to his route
Now when he brings my pushrods, I can get this motor done and in the car......
That's the same cam I'll be using in my 383, along with a set of Dart Iron Eagle 200cc heads. In fact, speaking of new parts, I just got my RPM air-gap today. The UPS guy noticed the Summit box, we get to talking, and I ended up taking the cover off the Vette and letting him drool for a bit before he had to go back to his route Now when he brings my pushrods, I can get this motor done and in the car......
Melting Slicks
Joined: Jul 2004
Posts: 3,248
Likes: 48
From: westland mi
Originally Posted by bmxer23m
Awesome, I love brand new metal! I thought I would add my new stuff too...
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Drifting
Joined: Jul 2002
Posts: 1,943
Likes: 1
From: Rosemount MN
Bumpy cam.
I used a Comp XR282HR in my 383, good for 491 HP
.510/.520 lift 282/288 duration 230/236 duration @0.050" 110 LSA
Been very happy so far, none of the lobe wiping problems with a hydraulic roller.
Check out the Comp Pro-Magnum rockers, stainless steel with less mass over the valve than most aluminum rockers.
I used a Comp XR282HR in my 383, good for 491 HP
.510/.520 lift 282/288 duration 230/236 duration @0.050" 110 LSA
Been very happy so far, none of the lobe wiping problems with a hydraulic roller.
Check out the Comp Pro-Magnum rockers, stainless steel with less mass over the valve than most aluminum rockers.
Last edited by Tonys96; May 2, 2006 at 05:31 PM.
Instructor
Joined: Mar 2006
Posts: 119
Likes: 0
From: Albuquerque NM
It's nice to be single, 
, I don't have a wife to tell me where to put my car parts...
And yes, I will show pics once I install the parts, I will be painting my frame this weekend. I wish I had some of those engine parts up there... Here is what this weekend consists of:
, I don't have a wife to tell me where to put my car parts... And yes, I will show pics once I install the parts, I will be painting my frame this weekend. I wish I had some of those engine parts up there... Here is what this weekend consists of:
Safety Car
Joined: Oct 2004
Posts: 3,920
Likes: 731
From: Youngstown Ohio
[QUOTE=oregonsharkman]I just got the new cam and lifters set:
Comp Cams 286HR Hydraulic Roller retrofit kit.
lift=.560/.560 duration 230/230 @050
Heads just came back from a competetion port/polish/valve job/new springs job by Louthan Competetion Cylinder heads.....~$800
Going in my 383 and hoping to push 500hp
That's the cam I'm using in my 383.....also using 1.65 rockers to extend the lift to .617 (see my signature for combo info).
Good luck!!
Comp Cams 286HR Hydraulic Roller retrofit kit.
lift=.560/.560 duration 230/230 @050
Heads just came back from a competetion port/polish/valve job/new springs job by Louthan Competetion Cylinder heads.....~$800
Going in my 383 and hoping to push 500hp
That's the cam I'm using in my 383.....also using 1.65 rockers to extend the lift to .617 (see my signature for combo info).Good luck!!
Instructor
Joined: Jun 2004
Posts: 190
Likes: 0
From: Avon CO
i had to laugh when i saw bmxer's pic, looked like in front of my shop and had the same paint line up..dont have to much fun! Thats suspension looks awesome also, not to mention that I would put money on 500 horse with that cam and head setup!
