QuadraJet "re jetting" how to ?
Thread Starter
Intermediate
Joined: Jan 2001
Posts: 47
Likes: 0
From: Stockholm Sweden
QuadraJet "re jetting" how to ?
I would guess I have stock needles and jet's in my quadrajet.
It's the original carb on my 461Cui BB. I now have headers a mild cam
and larger valves than stock. I think the mixture is on the lean side now.
The sparkplugs are a litte towards white in colour.
Do I change primary and secondary rods ? Maybe I must change jet
at the same time ?. What should I ask for at the parts store?
Any articles on this topic at any web site ?
Thanks.
Race Director
Joined: Apr 1999
Posts: 11,520
Likes: 13
From: CORVETTE 77 385 C.I. TEXAS
Re: QuadraJet "re jetting" how to ? (shark)
What year, pri. jets & rods & sec. rods & hanger?
Sec. hanger & sec. rods can be removed by removing 1 screw & hanger has 1 letter & sec. rods have 2 letters. Sec. "jets" are fixed, replace sec. rods & hanger to "jet".
[Modified by Ganey, 8:23 AM 8/26/2001]
Sec. hanger & sec. rods can be removed by removing 1 screw & hanger has 1 letter & sec. rods have 2 letters. Sec. "jets" are fixed, replace sec. rods & hanger to "jet".
[Modified by Ganey, 8:23 AM 8/26/2001]
