Manual trans;replace clutch neutral start switch
Thread Starter
2nd Gear
Joined: Apr 2001
Posts: 2
Likes: 0
From: Freeport, IL USA
Manual trans;replace clutch neutral start switch
I have to replace the clutch neutral/safety start switch on my 81. This has manual trans and the switch is connected to the clutch pedal. I am trying to figure out how to get at the screw that holds it in place, as well as the linkage rod. I have all the parts.
Race Director
Joined: Oct 2000
Posts: 11,891
Likes: 3
From: Kansas City, MO ...I'd like to go fishing and catch a fishstick. That'd be convenient. - Mitch Hedberg
Good luck. That's about all the help I can offer. I had to add the rod between the clutch and the switch and that was enough of a pain. You can connect the two wires that go to the switch to bypass it if the bad switch is keeping you from driving the car. Just make sure the car is in neutral when you start it.
