Ring and Pinion
Abby Normal
Joined: Dec 2001
Posts: 53,387
Likes: 92
From: Press "2" for English
i believe the dana 36 used in the c2-c3 does use a platform specific ring and pinion. the good news is richmond gear makes just about every gear you could buy. contact them and they can tell you the correct gear for what you want to do. then you just purchase the gear set from summit or jegs for half the price of the 'corvette tax' in most of the catalogs.
you may be able to get an even better deal through a vender like van steel who may just exchange your old, tired unit with a rebuilt one already containing the gears you want.
you may be able to get an even better deal through a vender like van steel who may just exchange your old, tired unit with a rebuilt one already containing the gears you want.
Race Director
Joined: Dec 1999
Posts: 19,610
Likes: 778
From: Forked River NJ
The Vette rear is specific and requires a set of gears for Vettes only. The stock 10 bolt GM gears will not work tha tyou are thinking about. Toms Differential has the gears as do a few others. The ywill be more $$$ because they are specific for Vettes.
