Headers Need Painted?
Thread Starter
Intermediate
Joined: Nov 2006
Posts: 44
Likes: 0
From: Fort Myers Florida
Headers Need Painted?
I have a set of Mr. Gasket headers and had them bead blasted. What is the best paint or coating to use? When I had them blasted the guy coated them with something grey but it is already coming off and re rusting.
I don't want to wrap them just something that will look good and last.
Powder coat? Paint?
I don't want to wrap them just something that will look good and last.
Powder coat? Paint?
Le Mans Master
Joined: Dec 2006
Posts: 8,837
Likes: 1,028
I have a set of Mr. Gasket headers and had them bead blasted. What is the best paint or coating to use? When I had them blasted the guy coated them with something grey but it is already coming off and re rusting.
I don't want to wrap them just something that will look good and last.
Powder coat? Paint?
I don't want to wrap them just something that will look good and last.
Powder coat? Paint?
Eastwood high temp silver is good.
Ceramic coating is best.
Instructor
Joined: Apr 2006
Posts: 123
Likes: 103
From: Abingdon Maryland
I had my big block headers black ceramic coated for $285.00. They will do small block headers for $230.00. http://www.eastcoastpowdercoating.co...icing_list.htm
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
