New beautiful fully adjustable upper control arms
Thread Starter
Melting Slicks
Joined: Dec 2005
Posts: 2,441
Likes: 0
New beautiful fully adjustable upper control arms
I saw this product in this months issue of Corvette Enthusiast. The links in this page aren't working well at the moment but the arms look similar to the example at the top of the page. Cheap too!
http://www.spcperformance.com/ProSer...erieshome.html
http://www.spcperformance.com/ProSer...erieshome.html
Race Director
Joined: Dec 1999
Posts: 16,945
Likes: 9
yes I got mine a couple of years ago from pole position. They are circle track arms, universal mount so no corvette bolt spacing on the cross shafts. You can get corvette specific arms from savistke classic & customs ( http://www.scandc.com ) which make installation a bolt on del. I made the lower control arms, since these were available I just bought them..no need to reinvent the wheel twice 
EDIT, I see spc IS pole position..I wondered what happened to them as the old website was gone...and they offer the C3 arms right there..nice! Mine are all steel, may upgrade to alu sleeves but I'll use swaged tubing, not the hex stuff.
Taijiutsu, they eliminate having to mess about with shims to dial in the front susp. geometry.
EDIT, I see spc IS pole position..I wondered what happened to them as the old website was gone...and they offer the C3 arms right there..nice! Mine are all steel, may upgrade to alu sleeves but I'll use swaged tubing, not the hex stuff.
Taijiutsu, they eliminate having to mess about with shims to dial in the front susp. geometry.
Last edited by Twin_Turbo; Feb 6, 2007 at 09:43 AM.
