Looking for metric Heim joint source.
Thread Starter
Tech Contributor
Joined: Jun 2004
Posts: 20,905
Likes: 962
From: I tend to be leery of any guy who doesn't own a chainsaw or a handgun.
Looking for metric Heim joint source.
I'm dealing with a bunch of metric silliness installing my C4 suspension. I'm trying to find a 10 mm female thread heim (Not sure of the thread pitch description at the moment) to thread onto the upper end of some shocks. I've seen several sources of SAE male heims, but no metric female sources yet. Any help would be appreciated,
thanks,
Mike
thanks,
Mike
Thread Starter
Tech Contributor
Joined: Jun 2004
Posts: 20,905
Likes: 962
From: I tend to be leery of any guy who doesn't own a chainsaw or a handgun.
TT,
Thanks for the info. I checked their website and it looks like these parts are in stock and at a very reasonable price. The specs look very good too. I had previously checked the shock manufacturer's website, and it was unable to locate these type ends, despite the fact that I typed in their part numbers I had found in some literature I had laying around. Their poor website performance cost them a sale.
I'll call McMaster in the morning.
thanks again,
Mike
Thanks for the info. I checked their website and it looks like these parts are in stock and at a very reasonable price. The specs look very good too. I had previously checked the shock manufacturer's website, and it was unable to locate these type ends, despite the fact that I typed in their part numbers I had found in some literature I had laying around. Their poor website performance cost them a sale.
I'll call McMaster in the morning.
thanks again,
Mike
