Steering Box question
Burning Brakes
Joined: Jul 2006
Posts: 1,047
Likes: 12
From: SoCal
Contact forum member gtr1999 - he has a great reputation (do a forum search for posts that he's mentioned in or has participated in).
But, they can be done without any special tools (my buddy and I did rebuilds for my '72 and '73) and Flaming River will sell you a rebuild kit. The rebuild is a PITA though...
But, they can be done without any special tools (my buddy and I did rebuilds for my '72 and '73) and Flaming River will sell you a rebuild kit. The rebuild is a PITA though...
Le Mans Master
Joined: Apr 2005
Posts: 6,346
Likes: 418
From: Seattle Area WA
The only special tools you need are bushing drivers and a 0-30 inch pound torque wrench with a dial to do the job accurately. Contact Gary (GTR1999) or Mike Dyer (Tracdogg2) for parts or to do your rebuild. I'd plan on about 4-5 hours for the job for your first time. If your gears are shot, this get expensive.
Intermediate
Joined: Dec 2004
Posts: 40
Likes: 0
From: Richmond Virginia
Re:Steering Box question
Leo,
I just got my steering box rebuilt by forum member GTR1999, and the sevice and communication from this gentleman was incredible. He sent pictures of the progress during every phase of the job, from delivery to completion. The workmanship and finish on the box was superb, both inside and out. Shoot him an email, you will not be sorry. Thanks again Gary for such a great job!!
I just got my steering box rebuilt by forum member GTR1999, and the sevice and communication from this gentleman was incredible. He sent pictures of the progress during every phase of the job, from delivery to completion. The workmanship and finish on the box was superb, both inside and out. Shoot him an email, you will not be sorry. Thanks again Gary for such a great job!!
Safety Car
Joined: Oct 2004
Posts: 4,809
Likes: 236
From: Utah
Leo,
I just got my steering box rebuilt by forum member GTR1999, and the sevice and communication from this gentleman was incredible. He sent pictures of the progress during every phase of the job, from delivery to completion. The workmanship and finish on the box was superb, both inside and out. Shoot him an email, you will not be sorry. Thanks again Gary for such a great job!!
I just got my steering box rebuilt by forum member GTR1999, and the sevice and communication from this gentleman was incredible. He sent pictures of the progress during every phase of the job, from delivery to completion. The workmanship and finish on the box was superb, both inside and out. Shoot him an email, you will not be sorry. Thanks again Gary for such a great job!!
The attention to detail and communication was superb. I would not buy new, but have GTR1999 rebuild. Here are some pics of mine after the rebuild(better than new)! Would replace the rag joint also.
Race Director
Joined: Feb 1999
Posts: 19,659
Likes: 34
From: Lenoir City Tennessee
Ci 6, 8 & 10 Veteran
St. Jude Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15
Differential Rebuild
The Life Of A Vette Posi
Trailing Arms
U-Joint Install
Pinion Seal Replacement
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer