Oil pan pickup
Thread Starter
Melting Slicks
Joined: Aug 2006
Posts: 3,429
Likes: 20
From: Kingston Ontario
Oil pan pickup
Hmmm...just got the BBC pan pickup in the mail and maybe I'm missing something. Not only is the bore smaller for the tube but the thing only will fit sticking out the side of the pump...
They have 100% feedback on e-bay and their site lists the pickup also as BB. Still trying to figure this out, I thought I was good at puzzles....
http://www.southwestspeed.com/?sec=view_part&id=10221
They have 100% feedback on e-bay and their site lists the pickup also as BB. Still trying to figure this out, I thought I was good at puzzles....http://www.southwestspeed.com/?sec=view_part&id=10221
Team Owner
Joined: Aug 2006
Posts: 24,125
Likes: 15
From: Columbia Missouri
Very odd. I had a small block pickup that was very hard to get in the pump, but I think that's a totally different situation.
Have you contacted the manufacturer yet? They may have some insight or suggestions.
Have you contacted the manufacturer yet? They may have some insight or suggestions.
Burning Brakes
Joined: Feb 2006
Posts: 1,024
Likes: 1
From: AL
if the tube would fit, it looks like the pickup would be under the pump???
this one is closer to the center of the sump:
http://i73.photobucket.com/albums/i2...lPickup001.jpg
this one is closer to the center of the sump:
http://i73.photobucket.com/albums/i2...lPickup001.jpg
Melting Slicks
Joined: Nov 2001
Posts: 2,668
Likes: 43
From: Eastern US XX
