stalling
Thread Starter
Racer
Joined: Aug 2004
Posts: 288
Likes: 0
From: Reinholds pa
stalling
first off my car is a stock 350 with a 400 turbo with a shift kit and a 3000 stall and 355 gears. when i brake hard or hit the brakes hard after aburn out it stalls or almost stalls. i,m thinking maybe its the float level 
Le Mans Master
Joined: Apr 2007
Posts: 7,353
Likes: 72
From: Graceland in a Not Correctly Restored Stingray
As Lars says, "90% of all carb problems are ignition problems." So, before doing anything to the carb you should always verify that your ignition system and timing are dead on. The problem could also be due to an intake manifold leak. Then look to the float level, too lean idle mix, or too low idle speed and such...
Hope that helps.
Hope that helps.
