T.I ignition amplifer box

Reply Subscribe

Thread Tools

Search this Thread

Oct 25, 2007 | 11:07 PM

dmayhew

Thread Starter

Drifting

Joined: Oct 2007

Posts: 1,254

Likes: 5

From: Brown Summit North Carolina

T.I ignition amplifer box

I have a 1971 Lt-1 that has had the T.I. removed sometime in the past. The L.H. frnder shirt has damage repair and the 3 bolt holes are glassed over. I need to know if anyone can e-mail me a photo of the amplifer box installed or at least the 3 holes. I need to know which way to turn the box and where exactly it attaches.

Thanks
David

Oct 26, 2007 | 07:18 AM

GDaina

Race Director

Joined: Feb 1999

Posts: 16,978

Likes: 7

From: In Dreams There Is Truth Ohio

The box is placed on the outside of the inner fender. You should see the patch work that cover the holes....if you carefully sand the area, you should see the outline of the holes.

Oct 28, 2007 | 08:46 PM

dmayhew

Thread Starter

Drifting

Joined: Oct 2007

Posts: 1,254

Likes: 5

From: Brown Summit North Carolina

Quote:

Originally Posted by GDaina

The box is placed on the outside of the inner fender. You should see the patch work that cover the holes....if you carefully sand the area, you should see the outline of the holes.

Thanks , It took over a hour of slow sanding from the underside with wheel removed. , but I found 1 and the others were easy based on known hole spacing.

David

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump