AC Compressor what will fit
Melting Slicks
Joined: Nov 2001
Posts: 2,214
Likes: 0
From: Casa Grande AZ
Re: AC Compressor what will fit (slide)
My handy dandy Hollander interchange shows many, many other vehicles used the same or an interchangeable compressor (no mod bolt in). It says yours should be an axial type without the superheat switch. Specifically from Corvettes, the same unit was used from '74 - '76. It also shows the compressor interchanges with '62-'71 Vette.
The other models that used an interchangeable compressor used either a 5" or 5 1/2" pulley so you need to look at that. It also says that later models used metric bolts. If you want the full list of part numbers and interchanges I could fax it to you. Shoot me an email if you want it.
The other models that used an interchangeable compressor used either a 5" or 5 1/2" pulley so you need to look at that. It also says that later models used metric bolts. If you want the full list of part numbers and interchanges I could fax it to you. Shoot me an email if you want it.
Melting Slicks
Joined: Feb 2001
Posts: 2,562
Likes: 1
From: (Temporarily) Colorado Springs Colorado
Re: AC Compressor what will fit (lbell101)
I also looked in Hollander and saw that there were about 2-3 pages of interchangable compressors. I also saw that my 72 (just needs the clutch) only interchanges with a 73 ... :mad :mad :mad Sure looks like the same as my 72 El Camino's . I'm going to look close at both.
Thread Starter
Racer
Joined: Feb 2001
Posts: 318
Likes: 0
From: Morrisdale Pa
Re: AC Compressor what will fit (The Wanderer)
Thanks for the info, I may just buy a rebuilt one looks like they run about 180.00 and I know it will work when I bolt it on. Thanks again
